CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318296
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
54 Seconds
The Bosch Rexroth Indramat CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW is part of the CSH Advanced Controllers series. It features 16 digital inputs and 16 digital outputs, with an analog input resistance of 160 kOhm and analog output resolution of 19.5 mV per increment. The controller supports parallel interface communication, has an RJ-45 8-pin engineering connector, and utilizes a resolver and HSF encoder interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW is a single-axis controller card produced by Bosch Rexroth Indramat within the CSH Advanced Controllers series. Installed in a drive rack, it links servo inverters with higher-level PLCs and supervises motion sequences in industrial automation. The card processes encoder feedback, executes position loops, and issues torque or velocity commands so that packaging lines, pick-and-place gantries, and assembly stations maintain repeatable trajectories and cycle times. An integrated I/O layer monitors local sensors and actuators, which helps reduce cabinet wiring and keeps control functions close to the axis.
Sixteen digital inputs and sixteen digital outputs on the PLC side give the module direct interaction with field switches and solenoids. Analog monitoring is protected by an input resistance of 160 kΩ, which limits current draw from transducers. Each output step is resolved at 19.5 mV/inc, allowing fine scaling of analog reference signals sent to downstream drives. High-speed motion data are exchanged over a Parallel Interface that minimizes latency between the card and its power section. When the controller operates in its CCD Master role, Ethernet telegrams are transported under the IEEE 802.3 protocol stack and routed through the engineering socket that supports 100Base-TX bandwidth. This arrangement allows service software to access parameters while real-time motion telegrams continue without interruption.
The auxiliary serial port accommodates diagnostics at rates up to 115 kBaud and supports cable lengths of up to 15 m, enabling local panels to query status without network access. Resolver feedback is energized by a sinusoidal carrier at 4 kHz and an excitation of 18.2 Vpp, while the secondary encoder supply delivers 8 V DC for HSF sensors. Output relays can switch loads up to 30 VDC at 1 A, so valve coils and signal lamps can be driven directly. The RJ-45 8-pin service connector and shielded cabling support installation in harsh manufacturing environments.
Frequently Asked Questions about CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW:
Q: What type of connector is used for engineering communication on the CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW controller?
A: The CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW controller uses an RJ-45, 8-pin connector for engineering connections.
Q: How many digital inputs and outputs are available on the CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW controller?
A: This controller supports up to 16 digital inputs and 16 digital outputs for programmable logic operations.
Q: What communication standard and role does the CCD interface support on the CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW?
A: The CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW controller is configured as a CCD Master using the IEEE 802.3 standard.
Q: What types of encoder interfaces are provided on the CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW controller?
A: Encoder feedback options include both Resolver and HSF interfaces on this controller.
Q: What Ethernet speed is supported by the engineering interface on the CSH01.2C-PL-EN1-NNN-CCD-NN-S-NN-FW?
A: The engineering Ethernet port operates at 100Base-TX, suitable for high-speed networking.
