CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911320990
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
24 Seconds
The Bosch Rexroth Indramat CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW is part of the CSH Advanced Controllers series and is designed as a single-axis controller. It features a parallel interface with 16 inputs and 16 outputs, supports resolver and HSF encoder interfaces, and has two analog inputs and two analog outputs with 12-bit resolution. The controller has a basic power consumption of 8.5 W and a typical inrush current of 4 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW control section is produced by Bosch Rexroth Indramat as part of the CSH Advanced Controllers series. It plugs into an IndraDrive power module and supplies motion control, PLC logic, and field I/O processing for one servo axis within automated machinery. In automated systems, it handles the control tasks that link drive commands, local logic, and connected I/O within the same hardware layer. This arrangement keeps axis control functions inside the drive platform instead of relying on a separate external controller.
This control section is configured for single-axis operation, so one motor channel is processed directly on the board. During normal operation it draws only 8.5 W of internal power, which helps limit heat inside the cabinet. Command data and discrete status bits are exchanged through a Parallel Interface that provides 16 inputs and sixteen output lines. Two MA1 analog inputs and two analog outputs are available, each using 12-bit resolution for proportional reference or feedback signals. The analog channels support external process signals without requiring a separate converter card, and a single-line control panel on the front of the card shows parameter numbers and fault codes for local setup and status review.
Network coordination is handled through the controller’s master role on the IEEE 802.3 cross-communication bus, enabling deterministic data exchange with other IndraDrive sections. Feedback devices connect to the dual-format resolver and HSF encoder interface, and the board supplies the transducer with 8 V excitation. Pulse-train commands for downstream devices can be issued with a maximum width of 100 ms. At startup, the electronics tolerate an inrush of 4 A, while the relay contact block can switch DC 24 V at 1 A for drive-ready signaling. This combination keeps feedback handling, network communication, and relay signaling on the same control section within the drive assembly.
Frequently Asked Questions about CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW:
Q: How many axes can be controlled with the CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW?
A: The CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW controller is configured for single-axis operation.
Q: How many parallel interface inputs and outputs does this controller provide?
A: This controller supports 16 parallel interface inputs and 16 parallel interface outputs.
Q: What types of encoder interfaces are available on the CSH01.2C-PL-EN1-MA1-CCD-NN-S-NN-FW?
A: It features both resolver and HSF encoder interfaces for feedback connections.
Q: Which networking standard is supported for cross-communication?
A: The cross-communication standard used is IEEE 802.3, allowing networking with compatible devices.
Q: What is the rated voltage and current for the relay contact on this model?
A: The relay contact on this controller is rated for DC 24 V at 1 A.
