CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911325277
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
24 Seconds
The Bosch Rexroth Indramat CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW is part of the CSH Advanced Controllers series and features standard control panel and cross communication via Ethernet with ports X24 and X25. It supports CANopen and DeviceNet master communication and is equipped with safety starting lockout using a 9-pole X41 connector. The controller measures 244 mm in height, 49.5 mm in width, and 103 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW is a plug-in control section built by Bosch Rexroth Indramat for the CSH Advanced Controllers series. It mounts on an IndraDrive power stage as the command and interface section of the drive. In operation, it governs motion axes, coordinates fieldbus traffic, and applies configured safety logic so the drive can execute position, speed, and torque commands in automated machinery.
System and network integration are handled through several dedicated channels. Cross-controller traffic moves over Ethernet, and the signals are routed through the twin X24 and X25 sockets for deterministic peer exchange. Drive setup uses an Ethernet-based engineering link, which is accessed at the front-panel X26 jack so parameters can be uploaded or monitored in real time. Upstream field communication relies on CANopen / DeviceNet, and the drive master lines terminate at the keyed X60 connector so one cable carries control words, status words, and cyclic data. A standard control panel is fitted on the face of the unit for local diagnostics, while the internal encoder emulator delivers SSI-formatted feedback for legacy controllers.
Safety-related functions are centered on Starting Lockout, which disconnects the gate pulses until the external circuit validates all enable conditions through the nine-pole X41 header. Position feedback from the motor enters through the multiprotocol IndraDyn / Hiperface / 1 Vpp / TTL interface, and the 12 V sensor supply is current-limited inside the card to protect wiring. The housing measures 244 mm in height, 103 mm in depth, and 49.5 mm in width, which allows multiple controllers to be lined up on a common backplane without taking excessive cabinet space. These dimensions also leave clearance for ventilation around the card and keep the safety connector, master bus, and engineering ports accessible after installation.
Frequently Asked Questions about CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW:
Q: What master communication protocols are supported by the CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW controller?
A: The CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW uses CANopen and DeviceNet for master communication.
Q: Which cross communication medium and ports does the CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW use?
A: Ethernet is used as the medium for cross communication and the ports used are X24 and X25.
Q: What encoder interfaces are available on the CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW unit?
A: The encoder interface options include IndraDyn, Hiperface, 1 Vpp, and TTL.
Q: What type of control panel is equipped on the CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW?
A: A standard control panel is supplied on this controller.
Q: What safety feature does the CSH01.2C-CO-ENS-MEM-CCD-L1-S-NN-FW provide and how many poles are on its safety connector?
A: The safety function provided is a starting lockout and it uses a 9-pole safety connector at X41.
