Product Description:

The CSH01.2C-CO-ENS-EN2-CCD-L1-S-NN-FW is a plug-in controller card manufactured by Bosch Rexroth Indramat for the CSH Advanced Controllers series. Installed in IndraDrive servo inverters, it supplies real-time motion sequencing, communication routing, and diagnostics that keep multi-axis production lines synchronized and responsive. By hosting both logic processing and network gateways on one compact board, it reduces cabinet complexity and supports integration in assembly, packaging, and material-handling equipment.

This version draws its logic power from a DC 24 V supply and dissipates only 8.5 W, so forced ventilation is rarely needed even in dense racks. Serial service access is handled through the built-in RS232 port, while machine-level traffic flows over the master bus that supports CANopen/DeviceNet for cyclic data exchange with drives, sensors, and HMI nodes. An Ethernet-based interface permits parameter loading without interrupting operation. The module is supplied with a standard control panel whose membrane keys and numeric display support local adjustment. Overall height is 241 mm, enabling direct alignment with adjacent power sections, and cross communication is available to share setpoints among neighboring cards. The starting lockout safety function prevents drive enable until the controller completes its internal startup checks.

On initial energization, the controller experiences an inrush current of 4 A that lasts up to 100 ms, which typical 24 V supplies can tolerate without extra buffering. The unit provides 2 analog outputs for ±10 V speed, torque, or tension references toward external amplifiers. Cabinet space is conserved by the slim 49.5 mm width and a depth of 103 mm, leaving adequate airflow between rows of equipment. This narrow form also helps keep terminal strips accessible while maintaining clearance behind closing panel doors.