CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295681
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200 is part of the CSH Advanced Controllers series and supports control communication via SERCOS and a serial interface with RS232. It features an RJ-45, 8-pin engineering port supporting 100Base-TX Ethernet with a maximum cable length of 100 meters, and has a max group output current of 1000 mA. Relay contact is rated for DC 24 V at 1 Amp, and the digital input high and low levels are 15 V and 5 V respectively.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200 is a motion-logic controller card produced by Bosch Rexroth Indramat for integration within the CSH Advanced Controllers series. The card acts as the central processing and network node inside a modular drive system, coordinating servo axes through real-time bus communication and handling I/O preprocessing. Within industrial automation cells, it links field devices, converts machine-level commands into drive instructions, and maintains deterministic timing between motion tasks and sensor feedback.
In this variant, command exchange with drives occurs over SERCOS at the controller’s dedicated X20 and X21 fiber ports, maintaining synchronous cycles. The digital input block recognizes a logic high at 15 V and a logic low at 5 V, allowing direct connection to standard PLC signals. For service access, the board provides a 100Base-TX interface on an 8-pin RJ-45 socket. Configuration and diagnostics travel over CAT5e ITP cabling, and the link remains free of attenuation up to the specified 100 m distance. The Ethernet channel coexists with the SERCOS ring, giving a separate path for setup and status access without interrupting real-time traffic.
The output side is dimensioned for sensor power and relay switching tasks. A group of digital outputs can source up to 1000 mA, while any single point is limited to 500 mA; both limits protect field wiring from excessive load. When driving coils, the integrated suppressor dissipates 400 mJ of inductive energy to help prevent voltage spikes. The onboard relay can switch DC loads up to 24 V at 1 A, matching common cabinet control loops. For serial peripherals, the module offers an RS232 port with one addressable node, cable runs up to 15 m, and transfer rates up to 115 kBaud, enabling simple operator panels or barcode readers to share status data.
Frequently Asked Questions about CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200:
Q: What control communication protocol is used in the CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200 controller?
A: This controller features SERCOS as its control communication interface for real-time industrial networking.
Q: What type of engineering interface is available on this controller?
A: The engineering interface on this model is a 100Base-TX Ethernet port.
Q: What are the digital input high and low level voltages for the CSH01.1N-SE1-RF1-NNN-NNN-NNN-NN-FW/S200?
A: Digital inputs on this controller recognize high levels at 15 V and low levels at 5 V.
Q: What are the specifications for the serial interface on this model?
A: The serial interface provided is RS232 with a maximum serial data rate of 115 kBaud and a maximum cable length of 15 m.
Q: Which ports are used for SERCOS connections on this controller?
A: SERCOS connections can be made via the X20 and X21 ports on the controller.
