Product Description:

The CSH01.1C-SE-ENS-MA1-MD1-S1-S-NN-FW controller belongs to the CSH Advanced Controllers series produced by Bosch Rexroth Indramat. It is a control module intended for cabinet installation where it supervises mixed-signal I/O blocks and links them to motion drives or higher-level PLCs. By combining analog measurement, digital switching, and dedicated safety channels, the unit provides a coordination layer for repeatable sequencing, machine interlocking, and signal exchange in industrial automation equipment.

Its base power consumption is 7.5 W, which simplifies thermal planning for dense control panels. The ENS safety interface has an input resistance of 120 Ω, draws a supply current of 500 mA, and operates from 11.6 V, so connected monitoring devices can account for line impedance and fault thresholds. The MA1 section offers two analog inputs and two analog outputs, each with a ±10 V range and 12-bit conversion in both directions, which supports scaled feedback and reference signals. In the MD1 block, the controller accommodates 12 digital inputs for status capture and 8 digital outputs for actuator control, and each output can supply up to 0.5 A to solenoids or indicator lamps without auxiliary relays.

For host communication, an onboard RS-232 port supports data exchange up to 115 kBaud, allowing access from external controllers or local setup devices. The dedicated safety rail supplies 24 V and can deliver 1.6 A, permitting the wiring of light curtains or emergency-stop contactors without overloading the logic stages. These communication and safety functions work alongside the analog and digital channels so the module can manage sensing, interlocking, and command handoff within the same cabinet. Separate handling of logic, analog signaling, and safety power helps keep control wiring organized when the unit is integrated into compact machinery.