CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911329180
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
32 Seconds
The Bosch Rexroth Indramat CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW is part of the CSH Advanced Controllers series and operates with a 24 V DC control voltage. This controller features a SERCOS command interface, EN1 feedback interface, standard control panel, and has IP20 protection rating with an S2 safety package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW control section is manufactured by Bosch Rexroth Indramat for the CSH Advanced Controllers series. Installed inside an IndraDrive converter rack, it serves as the central processing unit for the drive system. It interprets motion commands, drives multiple axes, and supervises integrated safety logic within automated machinery and material-handling lines. By keeping command processing, feedback evaluation, and safety supervision in one module, the unit supports coordinated motion across connected axes without requiring a separate external motion processor.
It communicates with higher-level PLCs through the real-time command interface SERCOS. This deterministic fiber-optic bus transfers process data and drive parameters within microseconds for synchronized multi-axis motion. Internal electronics are powered by a separate 24 V DC supply, so logic remains active during main power removal for parameter retention and fault diagnostics. Because control power is separate from the main power stage, status handling can remain available when the converter output is shut down. The feedback connector marked EN1 accepts Hiperface-compatible absolute encoders, allowing closed-loop control with high position resolution. This lets the controller compare commanded motion with actual position and correct deviations during operation. A housing classification of IP20 indicates finger-safe but non-sealed construction. The control section is intended for installation inside a control cabinet with controlled airflow. For mains disturbances, the design is rated to Overvoltage Category III, so it can withstand switching transients found in fixed industrial power distribution.
Functional safety is integrated through the S2 package. It provides safe stop and safe speed monitoring without external relays. The front overlay uses the Standard control panel, giving basic keypad access and diagnostic LEDs for local setup when fieldbus access is unavailable. This local interface allows operating states and faults to be checked directly at the drive without relying on a separate programming connection.
Frequently Asked Questions about CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW:
Q: What command interface is present on the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW controller?
A: SERCOS is the command interface used by the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW advanced controller to enable high-performance motion control communication.
Q: What control voltage does the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW require?
A: This controller operates with a control voltage of 24 V DC, making it suitable for standard industrial power supplies.
Q: What feedback interface is offered by the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW controller?
A: The CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW features an EN1 feedback interface for connectivity and signal processing.
Q: What type of control panel comes with the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW?
A: This model includes a standard control panel for user configuration and operation access.
Q: What is the protection rating of the CSH01.1C-SE-EN1-NNN-NNN-S2-S-NN-FW controller?
A: The protection rating of this controller is IP20, providing basic protection against solid objects but limited water resistance.
