CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330606
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
28 Seconds
The Bosch Rexroth Indramat CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW is part of the CSH Advanced Controllers series and features a Multi-Ethernet communication module. This controller is equipped with analog input resistance of 160 kΩ, analog output current of 1 mA, and 19.5 mV output resolution per increment. It also provides relay outputs rated at 24 VDC and 1 A, along with three encoder slots labeled ENS and EN2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW control section is produced by Bosch Rexroth Indramat for the CSH Advanced Controllers series. It plugs into IndraDrive power units and serves as the local intelligence that executes motion profiles, interprets encoder feedback, and exchanges process data with the plant PLC. By combining axis regulation, fieldbus routing, and I/O handling on one compact card, it minimizes cabinet space while sustaining deterministic drive performance in assembly lines, packaging machines, and material-handling cells.
On the analog side, the module presents an input impedance of 160 kΩ, so transducer circuits experience minimal loading. Its sourcing analog output is limited to 1 mA, protecting sensitive reference inputs on downstream drives, and each step of the converter equals 19.5 mV/inc, which permits fine speed or torque trimming. Network traffic is routed through the Multi-Ethernet interface that can switch among EtherNet/IP, PROFINET, EtherCAT, or SERCOS over the same connector. Discrete devices can be driven directly because every digital output delivers up to 0.5 A. When an EN2 encoder is present, signal integrity is maintained by a differential driver matched to 35 Ω line termination, preventing reflections at high counting rates.
Current budgets for feedback supplies are separated between the encoder slots. The EN2 connector furnishes up to 350 mA for high-resolution readheads, while the ENS slot supplies 500 mA to multi-turn encoders that contain onboard memory. Both channels share a regulated rail of 11.6 V, keeping voltage within tolerance even when the two 1 µs probe inputs are active. With a probe pulse width of 4 µs and a relay contact rated at 1 A and 24 VDC, the card handles edge capture and safety-relay signaling without external conditioners, enabling precise drive coordination inside distributed automation architectures.
Frequently Asked Questions about CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW:
Q: What communication options are available on the CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW controller?
A: This controller is equipped with a multi-Ethernet communication module, supporting various Ethernet-based interfaces.
Q: What is the analog output resolution for this Bosch Rexroth controller?
A: The CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW provides an analog output resolution of 19.5 mV per increment.
Q: How many probe inputs does the CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW have?
A: Two probe inputs are available on this model, allowing for precise timing measurements.
Q: What are the relay output ratings for this controller in terms of current and voltage?
A: The relay output on this controller is rated for 1 A current at 24 VDC.
Q: Does the CSH01.1C-ET-ENS-EN2-EN2-NN-S-NN-FW include built-in safety technology?
A: This controller does not come equipped with integrated safety technology features.
