4.95 based on 202 reviews

🙶 Great response and customer service. Back-order item was shipped sooner than expected as well. 🙷

CMP70.1-SP-505-FN-K001-FW Bosch Rexroth Indramat

MPN: R911171666

No Tariffs On US Orders
  • Rated 4.5 (54 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Current response time:
5 Minutes 53 Seconds

Preparing your secure checkout page...

The Bosch Rexroth Indramat CMP70.1-SP-505-FN-K001-FW is a control unit from the CMP Control Units series, featuring an AMD Sempron 1 GHz processor and 256 MB SDRAM main memory. It has a Universal PCI bus interface, supports both 5 V and 3.3 V PCI compatibility, and operates on a 5 V DC supply voltage with a maximum current of 5 A.

Quote Request Form:

Warranty
Wake Industrial Warranty

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The CMP70.1-SP-505-FN-K001-FW is a compact control unit produced by Bosch Rexroth Indramat for the CMP Control Units series. Installed in a machine control rack, the card manages axis coordination, collects diagnostic data, and communicates with motion drives to keep production equipment synchronized. It forms the local intelligence between field sensors and higher-level PLCs, enabling deterministic response times required for high-speed assembly, packaging, and material-handling systems. Its rack-based format also supports centralized processing for coordinated machine functions.

It runs on an AMD Sempron, 1 GHz processor, giving deterministic 32-bit computation for interpolation tasks. Working memory is provided by 256 MB SDRAM, allowing the embedded operating system and user application to handle large parameter tables without paging delays. Battery-backed 16 MB SRAM retains configuration data during power cycling. During operation, the board draws only 21 W from the backplane, which helps limit cabinet heat load, while the logic rails are supplied through a regulated backplane line at 5 V DC. This memory arrangement helps the unit start quickly after a power cycle and retain stored calibration data when main power is removed.

Signal exchange with the host rack is handled through a Universal PCI connector that supports both 32-bit and 64-bit transfers. Electrical compatibility with different host backplanes is supported by the dual-voltage PCI arrangement of 5 V / 3.3 V, so jumper selection is not required. The board can source peripheral loads up to 5 A through its auxiliary header, and its ready relay is rated for 60 V / 1 A so status lines can drive external control circuits. The electronic assembly is qualified under climate class 3K3, so it remains functional in control cabinets up to 55 °C and 95% non-condensing humidity typical of factory environments. This interface arrangement also helps the board fit into mixed-generation automation racks that use different PCI backplane standards.

Bus Interface
Universal PCI
Climate Class
3K3
Main Memory
256 MB SDRAM
Max Current
5 A
Pci Compatibility
5 V / 3.3 V
Power Consumption
21 W
Processor
AMD Sempron, 1 GHz
Ready Contact Rating
60 V / 1 A
Static Memory
16 MB SRAM
Supply Voltage
5 V DC
  • CMP701SP505FNK001FW
  • CMP70 1 SP 505 FN K001 FW
  • cmp70.1-sp-505-fn-k001-fw

Frequently Asked Questions about CMP70.1-SP-505-FN-K001-FW:

Q: What type of bus interface does the CMP70.1-SP-505-FN-K001-FW control unit use?

A: This model is equipped with a Universal PCI bus interface for flexible system integration.

Q: What processor is used in the CMP70.1-SP-505-FN-K001-FW control unit?

A: The CMP70.1-SP-505-FN-K001-FW is powered by an AMD Sempron processor operating at 1 GHz.

Q: How much main memory is included in the CMP70.1-SP-505-FN-K001-FW?

A: This control unit includes 256 MB of SDRAM as its main memory.

Q: What is the supply voltage required for the CMP70.1-SP-505-FN-K001-FW?

A: The rated supply voltage for this unit is 5 V DC.

Q: What is the maximum current rating for the CMP70.1-SP-505-FN-K001-FW control unit?

A: The CMP70.1-SP-505-FN-K001-FW has a maximum current rating of 5 A.


Internal Product Review

  • ‘‘The CMP70.1-SP-505-FN-K001-FW is a Bosch Rexroth Indramat CMP control unit featuring a Universal PCI bus interface and an AMD Sempron processor at 1 GHz. A 256 MB SDRAM main memory paired with 16 MB SRAM gives this unit a responsive, well-balanced architecture for demanding control tasks. A very capable option for PCI-based industrial automation.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo