CMP60.2-SP-304-FN-NNNN-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911170645
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
22 Seconds
The Bosch Rexroth Indramat CMP60.2-SP-304-FN-NNNN-NW belongs to the CMP Control Units series and features a 650 MHz processor clock with 64 MB SDRAM and a 265 kB L2 cache. This unit supports up to 64 axes, 12 NC channels, and 32 spindles, with a typical power consumption of 21 W and a 5 V DC supply voltage. It provides Ethernet (100Base-T) and Profibus-DP communications, and supports a maximum Ethernet cable length of 100 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat CMP60.2-SP-304-FN-NNNN-NW is a compact motion and logic controller from the CMP Control Units series. Installed in multi-axis machining centers or transfer lines, the device coordinates drive networks, fieldbus traffic, and high-speed I/O so that mechanical axes follow programmed profiles in real time. It acts as the central processing element between Sercos servo drives, operator panels, and supervisory PLCs, ensuring deterministic command execution across the automation cell. This arrangement allows one control platform to handle coordinated motion, machine logic, and interface communication at the same time.
At the heart of the unit is a 650 MHz processor supported by a 64 MB SDRAM module and a 265 kB L2 cache. This combination allows complex kinematic transformations and buffering of large NC programs without bottlenecks. Motion data and diagnostics move over the 100Base-T Ethernet port, which supports cable runs up to 100 m for cabinet-to-cabinet links. When deterministic drive communication is required, the controller drives a Sercos bus at a 16 Mbaud signaling rate for fast cyclic data exchange. Legacy field devices connect through a PROFIBUS-DP interface that operates at 12 Mbaud, and this mix of interfaces supports communication with drives, remote I/O, and plant-level devices in the same control system.
The controller can coordinate up to 64 servo axes across as many as 12 numerical-control channels, while each channel may handle eight interpolated axes for contouring applications. Dedicated directives manage as many as 32 independent spindles for milling or routing heads, and axis groups are updated within a 250 µs block cycle to support smooth contour accuracy. The available channel structure supports simultaneous contouring, spindle control, and coordinated axis grouping in complex machining tasks. All electronics are powered from a 5 V DC back-plane supply, and under full communication load, the board draws no more than 5 A and dissipates 21 W of heat.
Frequently Asked Questions about CMP60.2-SP-304-FN-NNNN-NW:
Q: What Ethernet standard does the CMP60.2-SP-304-FN-NNNN-NW control unit support?
A: The CMP60.2-SP-304-FN-NNNN-NW supports the 100Base-T Ethernet standard.
Q: How many axes can the CMP60.2-SP-304-FN-NNNN-NW manage simultaneously?
A: This unit can control up to 64 axes at once.
Q: What is the supply voltage needed for the CMP60.2-SP-304-FN-NNNN-NW?
A: The supply voltage requirement is 5 V DC for this control unit.
Q: What is the processor clock speed of the CMP60.2-SP-304-FN-NNNN-NW?
A: It features a processor clock speed of 650 MHz for fast computations.
Q: How much SDRAM memory does the CMP60.2-SP-304-FN-NNNN-NW have?
A: The CMP60.2-SP-304-FN-NNNN-NW provides 64 MB of SDRAM for its operations.
