COVID-19 Update: Wake Industrial is open and available to support your automation needs.

Package arrived in Good Condition!

~ Micheal Smith Excellent North Carolina, USA

View All Reviews

Gregg was awesome and very helpful! Great Job!

~ Chad Thomas Excellent Ohio, USA

View All Reviews

This company was fantastic to work with! Very patient with us to make sure we ...

~ Carla Morgan Excellent Kentucky, USA

View All Reviews

Next day air shipping and we are up and running!! Thanks so much!

~ Jeanne Wolter Excellent Colorado, USA

View All Reviews

We asked for a fast turn around and Wake was up to the task!

~ Darrell Chapman Excellent Indiana, USA

View All Reviews

I contacted Gregg one morning in desperate need of two servos to get our Filler ...

~ Paul Kovacs Excellent California, USA

View All Reviews

The service that I received was outstanding!

~ Gary Douglas Excellent Ontario, Canada

View All Reviews

Understood our situation, and worked to help us get it solved. Very responsive, and stepped ...

~ Brian Tomlin Excellent Arizona, USA

View All Reviews

CLM01.3-A-0-4-B

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
The CLM01.3-A-0-4-B Servo Drive is manufactured by Rexroth Indramat Bosch. This drive has a Standard Two Axis Software Type and 4 Axes. The display on this drive is Backlit LCD.

CLM01.3-A-0-4-B

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
The CLM01.3-A-0-4-B Servo Drive is manufactured by Rexroth Indramat Bosch. This drive has a Standard Two Axis Software Type and 4 Axes. The display on this drive is Backlit LCD.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a CLM01.3-A-0-4-B to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The CLM01.3-A-0-4-B is a four-axis microprocessor-based positioning control with a Motorola 68000 microprocessor, 256K EPROM and 128K RAM. The Bosch Rexroth positioning control, the servomotor and the servo amplifier feature quick-connect cabling. The operation of the motor and amplifier are optimized through a plug-in personality module. 24 inputs and 19 outputs among the existing inputs and outputs can be defined and programmed by the user. The device offers the assurance of operating safety and integrity through several outputs and inputs for handshaking. It features a protection rating of IP 10. The control has a height of 15.35 inches, depth of 12.80 inches and width of 4.13 inches.

The positioning control must be installed within an altitude of 1,000m above sea level. The product may be installed at a higher altitude with proper cooling. It has a feed length resolution of 0.001 inches. The unit features a four-line LCD that can display alphanumeric characters with 16 characters in each line. This device also encompasses a keypad with 20 membrane switch keys. The pre-defined inputs have a voltage rating of 24VDC at 10mA while the pre-defined outputs feature a voltage rating of 24VDC at up to 50mA.

The keys in the keypad are used for cursor movement, data entry, entering parameter and program data as well as clearing error/fault messages. The data for each parameter can be entered, viewed or edited when the unit is functioning in Parameter Mode. The device operates in an ambient temperature range of 5°C and 45°C. It can be stored at a temperature between -30°C and +85°C.  The Manual Mode and Automatic mode are represented by the letters M and A respectively along with the program status. In case a soft or hard fault occurs, the control function comes to a halt and the display highlights a diagnostic message. The CLM01.3-A-0-4-B can be delivered to your preferred address and can be purchased from Wake Industrial with a one-year warranty period.

  • CLM013A04B
  • CLM01 3 A 0 4 B
  • clm01.3-a-0-4-b

CLM01.3-A-0-4-B Technical Specifications

Display: Backlit LCD
Number of Axes: 4
Software Type: Standard Two Axis