ECM01.1-CN01-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911298158
The Bosch Rexroth Indramat ECM01.1-CN01-NN is part of the CLM Axis Positioning Control Modules series and offers IP20 protection with a D-SUB male 9-pin fieldbus connector. It supports the ISO 11898 CAN standard, allows for a maximum relative humidity of 90 percent, and operates in ambient temperatures from 0 to 40 degrees Celsius.
Internal Product Review
The ECM01.1-CN01-NN is a CLM axis positioning control module with ISO 11898 CAN compliance and a 9-pin male D-SUB fieldbus connector. IP20 protection and contamination degree 2 support dependable cabinet integration in controlled industrial environments. Rated operation up to 40 °C makes the module a strong choice for stable axis positioning control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ECM01.1-CN01-NN is an axis positioning control module engineered by Bosch Rexroth Indramat for the CLM Axis Positioning Control Modules series. It functions as the central command element inside a drive package, receiving set points from higher-level PLCs and translating them into precise motion references for Indramat power drives. By regulating position, velocity, and acceleration profiles, the module supports coordinated multi-axis sequences required in material handling, packaging, and CNC stations. This arrangement allows the control stage to manage synchronized motion tasks without relying on separate timing logic between every axis component.
Its fieldbus interface conforms to the CAN standard ISO 11898 and is presented on a D-SUB (Male, 9 Pins) connector. Within that plug, CAN-H is routed to pin 7, CAN-L to pin 2, and the cable shield to pin 5, allowing deterministic real-time messaging to and from the plant controller. The housing provides an ingress rating of IP20, which means the electronics are protected against finger contact and solid objects greater than 12.5 mm but require mounting inside an electrical cabinet. Nominal performance is stated for ambient temperatures up to 40 °C; above this point, derating procedures must be applied, with functional limits extending to 55 °C.
The module is designed for installation at elevations up to 2000 m, although all rated data are guaranteed only to 1000 m. Operation is permitted between 0 °C and the previously noted thermal ceiling, while storage is allowed from −20 °C to 80 °C. Humidity can reach 90 % provided moisture condensation is not permitted; this aligns with a contamination degree of 2, indicating only non-conductive debris may contact energized parts. Beyond these limits, the protective coatings and board clearances can degrade, so cabinet climate control and filtered airflow help maintain suitable operating conditions. Stable enclosure conditions also help preserve signal quality and reduce the chance of avoidable operating faults.
