Product Description:

The CLM01.4-P-N-4-B-FW is an Indramat position control module manufactured by Bosch Rexroth Indramat for the CLM Axis Positioning Control Modules series. It coordinates multi-axis motion in machines that require electronic camming or sequential positioning. This type of controller is suited to applications that need repeatable position sequences without relying on a separate PLC for every motion step. The product is part of Line 01 and is design version 4, so it fits established rack layouts used with this control platform. A backlit LCD display presents parameters, alarm codes, and live position data, which makes local setup and diagnostics easier.

The controller manages 4 axes at the same time, and its memory holds 3000 instructions, allowing sizable motion programs to run internally. It accepts four analog command signals and returns four analog status outputs, which supports closed-loop coordination with connected drive hardware. Logic and I/O circuits operate from +24 V DC ±20%, and the electronics dissipate 45 W during operation. The housing has an IP20 enclosure rating, so the module is intended for installation inside a protected cabinet. Overall dimensions of 330 × 105 × 390 mm support panel or DIN-rail mounting, and the standard unit comes without expansion cards.

Allowable ambient temperature depends on airflow through the chassis. With forced ventilation of 3 m/s, the module can operate in ambient temperatures up to 55 °C. Startup is permitted down to 5 °C when condensation is prevented inside the enclosure. Communication with higher-level automation is provided by a Profibus-DP slave module, which supports deterministic transfer of setpoints, feedback, and diagnostic data. An internal forced-air channel directs heat away from critical components to support stable operation during extended machine cycles.