Product Description:

The CLM01.4-P-N-2-B-FW is a Bosch Rexroth Indramat position controller from the CLM Axis Positioning Control Modules series. As an Indramat position control unit, it supervises paired drives, interprets machine programs, and issues motion setpoints so automated equipment can reach commanded positions and velocities on synchronized axes. By integrating program storage, encoder sampling, and operator display functions in one housing, the module reduces the need for separate control hardware and supports coordinated motion in packaging, printing, and material-handling systems.

This standard controller works with 2 axes and uses a 12-bit analog input converter to digitize command voltages, while a 14-bit analog output stage sends fine control references to the drives. This arrangement supports accurate analog command handling for servo applications that rely on stable reference signals. The encoder interface samples feedback at 1 MHz, allowing high-resolution position calculation even on fast linear motors. Control logic executes up to 1000 assignments per second, so arithmetic, comparison, and jump instructions are processed with minimal delay. Up to 400 internal variables are available, and the standard 2-axis configuration remains compatible with the Profibus-DP slave module for higher-level PLC communication.

The program memory stores 3,000 instructions, which supports complex motion sequences and leaves room for diagnostics. A regulated supply of +24 V DC powers the logic circuits, and maximum power loss is limited to 45 W to keep cabinet heat moderate. Protection reaches IP20, which is suitable for installation inside closed electrical enclosures at ambient temperatures up to 45 °C. A backlit LCD display provides parameter access without external terminals, and the display also allows local viewing of status information during operation. The base model includes the required interfaces without expansion cards, and the front panel reports fault states directly on the unit.