Product Description:

The CLM01.3-LR1-06VRS-MS belongs to the CLM Axis Positioning Control Modules series manufactured by Bosch Rexroth Indramat. Classified as an Indramat position control unit, it governs intermittent incremental moves on single-axis roll-feed indexing equipment. The module operates with one incremental encoder for position feedback and is housed in an IP10 enclosure intended for clean control cabinets. Its four-line display and front keypad let operators review status, change parameters, and load programs without an external terminal. This operating style suits press systems that require repeatable indexing between machine cycles.

The controller is energized by 24 VDC logic power and draws a control current of 250 mA, while a 1.6 A fuse protects the supply line. Program storage relies on 256 KB EPROM, while dynamic data is handled in 128 KB RAM, allowing sizable motion profiles and diagnostic buffers. Thirty-two digital inputs accept limit switches, top-of-stroke sensors, and mode-select signals, while thirty-two digital outputs drive relays or indicator lamps for machine states. The available I/O count lets the module coordinate permissives, alarms, and machine-ready signals within one controller. Line designation 01 is used for this module and matches LR1 option boards.

Position accuracy is supported by a feed length resolution of 0.0001 in, enabling tight material advances ahead of stamping dies running up to 1200 strokes/min. Command execution is managed by a 32-bit microprocessor that calculates index distance, deceleration, and overshoot compensation in real time. The single-axis roll-feed software application works with the module’s display so operators can edit length, rate, and batch size directly on the panel. This arrangement helps the axis respond consistently when feed settings change during production.