Product Description:

The CLM01.3-LA1-04VRS-MS belongs to the CLM Axis Positioning Control Modules series produced by Bosch Rexroth Indramat. As an Indramat position control unit, it coordinates incremental motion in multi-axis machinery where timing and position consistency are important. It receives encoder feedback and sends position commands to downstream drives and motors in automated cells and packaging lines, supporting repeatable indexing, registration, and synchronized material movement during automated production and continuous feed handling.

The module supervises up to 4 axes and issues movement commands at a feed resolution of 0.01 mm, allowing precise material advance during cut-to-length or registration tasks. Internal logic is powered from a dedicated control supply of 24 Vdc, and its electronics draw a steady 450 mA during normal operation. Each axis is monitored by 1 encoder, while an additional measuring-wheel channel accepts an incremental encoder so linear travel can be compared directly with rotary feedback for improved tracking accuracy. The keypad carries 20 keys, and the operator interface uses a four-line display so parameter entry, status review, and diagnostics can be handled at the module without a separate terminal or host display. Line designation 01 identifies the hardware generation used throughout the series.

Component layout is cooled through natural convection, eliminating the need for fans and helping keep operating noise low inside the cabinet. The aluminum housing meets the IP10 protection class and is rated for cabinets installed up to 1000 m above sea level, which suits enclosed industrial control panels with basic touch protection. Overall weight is 6 kg, and the enclosure measures 105 mm wide, 390 mm high, and 325 mm deep, so available panel depth is an important consideration during installation. The convection path must remain unobstructed so heat can rise away from the housing and support stable operation across the declared altitude range during normal cabinet use.