Product Description:

The CLM01.3-A-E-2-B is an Indramat position control module produced by Bosch Rexroth Indramat for the CLM Axis Positioning Control Modules series. It serves as the central controller for machining centers, packaging equipment, or material-handling stations that require coordinated motion along two linear or rotary axes. By executing programmed positioning commands and supervising peripheral signals, the unit closes the loop between drive amplifiers and machine sensors so that commanded moves occur with the required accuracy and timing.

This controller is delivered in a standard 2-axis configuration and operates from a control-logic supply of 24 VDC. Position feedback is processed at a feed resolution of 0.01 mm, allowing fine incremental advances during contouring or indexing tasks. Operator interaction occurs through a four-line, backlit LCD supported by a 20-key membrane keypad, and the illuminated display keeps parameter values visible in dim enclosures. Serial diagnostics or program transfers are handled at up to 19,200 baud through the built-in communications port. The housing measures 390 mm in height, 105 mm in width, and 325 mm in depth, yet the mass is only 6 kg, which simplifies panel-door mounting without additional bracing. Expansion slots accommodate extra fieldbus boards or memory cards when future axis growth or recipe storage is required.

The module provides 88 auxiliary input points and 51 auxiliary output points so that valves, relays, or limit switches can be connected directly without external I/O racks. An added expansion header can source up to 250 mA to power external sensors. The housing has an IP10 rating, providing basic finger-safe shielding once the unit is installed inside a closed control cabinet. Twenty-four dedicated system inputs and eighteen system outputs handle start, stop, and fault chains, allowing the higher-capacity auxiliary channels to be reserved for process-specific functions.