Product Description:

Bosch Rexroth Indramat manufactures the CLM 01.3-W-0-1-B axis positioning control module within the CLM Axis Positioning Control Modules series. This unit acts as an Indramat position control, generating motion commands and monitoring feedback for a single servo axis in automated equipment. By combining the control logic and a human-machine interface in one enclosure, it supports decentralized axis regulation where accurate positioning and simple cabinet integration are required. This arrangement keeps setup and status review available at the machine rather than through a separate programming device.

The controller operates from a supply of 24 Vdc, an industry-standard logic level that minimizes auxiliary power wiring. Its slim chassis measures 105 mm in width, 390 mm in height, and 325 mm in depth, so it fits between drive amplifiers without blocking service access. With a mass of 6 kg, the module mounts securely on DIN rails or panel plates without extra support. Heat generated by the electronics escapes through vented top and side panels, eliminating the need for forced-air components. Internally, the unit supervises one axis and stores position data locally, allowing continued closed-loop motion if a higher-level controller goes offline.

The operator interface combines a backlit LCD that shows four lines of sixteen characters with 20 tactile keys for direct parameter entry, jog movements, and diagnostics. Cooling is done by convection, a fanless approach that reduces maintenance and avoids drawing dust into the cabinet. The enclosure has a protection class of IP10, which is suited to clean control areas where accidental finger contact and large debris must be blocked. Reliable operation is permitted up to 1000 m altitude, so the module can be used in most plant locations without derating. Because the module lacks expansion I/O, all field signals pass through the integrated connectors, which keeps wiring straightforward and preserves the compact housing.