Product Description:

The CLM 01.3-M-0-1-B is an Indramat position control module built by Bosch Rexroth Indramat for the CLM Axis Positioning Control Modules series. Designed for flying cutoff and other synchronized tasks, it governs a single axis and generates the motion profile required for cut-to-length, registration, or tracking applications in automated lines. Acting as a stand-alone motion controller, it interfaces with servo drives, field sensors, and operator panels to deliver length control without a separate PLC slot.

The controller supports 1 motion channel, so it coordinates one axis where multi-axis control is not required. Internal logic and field connections are powered from a control supply of 24 VDC, isolating the module from drive voltages while keeping wiring standard. Operator interaction is handled through a front panel with a 4 × 16-character alphanumeric display and 20 membrane keys, allowing parameter entry, production data recall, and diagnostic viewing without an external terminal. Machine signals arrive through 32 standard inputs, and an equal number of transistor outputs are available for valve, relay, or light-stack actuation. The flying cutoff function times linear knife motion relative to line speed so material is cut without stopping the conveyor.

The housing has a depth of 325 mm, a width of 105 mm, and a height of 390 mm, while convection cooling eliminates the need for fans. A sealed but vented chassis provides IP10 protection and has no I/O expansion slots, so the footprint remains fixed. At 6 kg, the module can be mounted on light DIN rails or shelves without additional bracing. Reliable positioning is aided by a part-length resolution of 0.01 mm, supporting tight cut tolerances when paired with suitable feedback devices. Operation is allowed up to 1000 m above sea level, assuming ambient conditions remain within standard control cabinet ranges.