CLM 01.3-F-0-2-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255671
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
7 Seconds
The Bosch Rexroth Indramat CLM 01.3-F-0-2-0 is an Indramat Position Control module from the CLM Axis Positioning Control Modules series, designed to control 2 axes with a 32-bit microprocessor. It features a standard LCD display with 4 lines of 16 characters each, has 20 keypad keys, and weighs 6 kilograms. The module measures 325 mm in depth, 390 mm in height, and 105 mm in width, and uses convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CLM 01.3-F-0-2-0 is an axis-positioning control module from Bosch Rexroth Indramat in the CLM Axis Positioning Control Modules series. Installed in multi-axis motion stations, it issues incremental position commands and supervises feedback to coordinate two servo or hydraulic axes in automated machinery. It is used where controlled axis positioning must be maintained during repeated machine cycles and changeovers. The unit fits into a cabinet through its card frame and relies on natural convection for heat dissipation, so no dedicated fan wiring is required.
The housing spans a width of 105 mm, a height of 390 mm, and a depth of 325 mm. Its mass is 6 kg, which should be considered when planning panel support and clearances around neighboring modules. These physical dimensions also affect cabinet spacing and the routing space available for control wiring. Front access is provided by a membrane keypad with 20 keys, and operator feedback appears on a standard LCD with 4 display lines. Protection is rated IP10, so the board area remains open to ventilation while still limiting accidental finger contact. The module is also approved for mounting up to 1000 m above sea level without derating.
User prompts accommodate 16 characters per line, which keeps status text and menu entries readable on the front display. Program storage is handled by 256 KB of EPROM, while runtime variables reside in 128 KB of RAM; this memory split supports stored operating logic, active process values, and diagnostic data during positioning tasks. Separate nonvolatile and working memory sections allow saved data to remain available after power is removed, while active values can be updated during operation. A 32-bit microprocessor executes interpolation and limit-checking cycles so the control section can react quickly to command changes and feedback updates. The display uses the standard CLM format, which keeps navigation and status presentation consistent across routine operating screens.
Frequently Asked Questions about CLM 01.3-F-0-2-0:
Q: How many axes can be controlled with the CLM 01.3-F-0-2-0 module?
A: The CLM 01.3-F-0-2-0 supports control for up to 2 axes, allowing precise positioning for multiple actuators.
Q: What cooling method is used by the CLM 01.3-F-0-2-0 positioning module?
A: This module uses convection cooling, functioning without external fans.
Q: How many keys are present on the keypad of the CLM 01.3-F-0-2-0?
A: The front panel includes a keypad with 20 individual keys for input and operation.
Q: What type of display does the CLM 01.3-F-0-2-0 use and how much information can it show at once?
A: The CLM 01.3-F-0-2-0 is equipped with a standard LCD display featuring 4 lines and 16 characters per line.
Q: What level of ingress protection does the CLM 01.3-F-0-2-0 feature?
A: This module provides IP10 protection, offering basic protection against solid objects but no protection against water.
