CLM 01.3-D-E-2-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911260860
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
43 Seconds
The Bosch Rexroth Indramat CLM 01.3-D-E-2-0 is part of the CLM Axis Positioning Control Modules series and supports 2 axes with 1 encoder for each axis. It features a 24 VDC control voltage, convection cooling, and weighs 6 kg. This module has a 4 x 16 LCD display, 20 keypad keys, and a 25-pin D-sub communication port.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CLM 01.3-D-E-2-0 axis positioning control module is produced by Bosch Rexroth Indramat within the CLM Axis Positioning Control Modules series. Designed as an Indramat position controller, it supervises coordinated motion for hydraulic or electromechanical actuators on production lines. By combining onboard processing, a membrane keypad, and fieldbus-independent serial links, the unit executes position loops and sequencing tasks so that connected drives reach commanded setpoints with repeatable accuracy in packaging, converting, or material-handling machinery.
The module is powered from a control supply of 24 VDC and exchanges data with higher-level systems through a 25-pin D-sub port that supports baud rates up to 19200 baud. Front-panel interaction occurs through a 4 × 16 LCD that shows parameters, faults, and axis position, while a keypad with 20 membrane keys allows direct entry of motion profiles and tuning constants. Thermal management relies on passive convection, eliminating the need for forced air. A plug-in expansion board offers additional digital I/O when auxiliary sensors or valves must be integrated. The unit has a depth of 325 mm, giving space for internal signal conditioning without exceeding standard cabinet rails.
With a width of 105 mm and a height of 390 mm, the controller occupies a narrow vertical strip of panel space, and its mass of 6 kg permits DIN-rail or plate mounting without supplementary supports. The architecture governs 2 independent axes, and each axis is monitored by a feedback channel that accepts 1 encoder per axis for closed-loop accuracy. Protection is limited to IP10, so the device must be installed inside an enclosed cabinet and kept free of falling debris. Operation is specified for convection-cooled environments up to 40 °C and installation sites up to 1000 m above sea level, supporting reliable cycle execution in most indoor automation cells.
Frequently Asked Questions about CLM 01.3-D-E-2-0:
Q: What type of communication port is featured on the CLM 01.3-D-E-2-0 control module?
A: The CLM 01.3-D-E-2-0 uses a 25-pin D-sub communication port for external connections.
Q: What control voltage does the CLM 01.3-D-E-2-0 require?
A: This module operates with a control voltage of 24 VDC.
Q: How many encoders per axis are supported on the CLM 01.3-D-E-2-0?
A: The CLM 01.3-D-E-2-0 supports position feedback with one encoder per axis.
Q: What type of cooling method does the CLM 01.3-D-E-2-0 use?
A: This unit is designed with convection cooling.
Q: How many axes can the CLM 01.3-D-E-2-0 control?
A: It is capable of managing two axes simultaneously.
