CFL01.1-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911170012
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat CFL01.1-N1 is part of the CFL Modules series and features 16 outputs, with 8 outputs per connector and 2 output connectors. It has a total output current of 4 Amps, a lamp load of 5 Watts, and operates at 24 V DC output voltage. The module supports a 1-Wire connection, with overload trip values ranging from 0.6 to 1.2 Amps and a restart delay of 10 milliseconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CFL01.1-N1 is a field-installable lighting control module produced by Bosch Rexroth Indramat within the CFL Modules series. Designed for cabinet or machine mounting, the device turns low-voltage outputs into coordinated switching signals for compact fluorescent or LED indicators and other small loads in automated cells. By managing several lamp circuits from a single logic interface, it simplifies wiring and allows the host PLC to monitor status and fault conditions without separate relays or contactors.
The module distributes a nominal output of 24 V DC to sixteen load channels arranged as two eight-pin connectors. Each channel is current-limited, and the aggregate switching capacity is governed by a 4 A total output rating. A dedicated electronic fuse opens when the summed load exceeds the typical trip point of 1.2 A per connector, or a minimum of 0.6 A under stringent thermal conditions, protecting printed traces and upstream supplies. When an overload clears, the internal logic waits 10 ms before re-energizing the outputs, helping prevent nuisance cycling after a fault. With 16 individually addressable outputs, the device can drive indicator lamps, solenoid pilot stages, or other small resistive loads without external power sequencing.
Protection also extends to transient suppression, because a clamp network limits line spikes to 26 V so downstream semiconductors are not overstressed during coil turn-off. The I/O header uses a 1-wire connection layout, allowing power and signaling to share one ribbon while the common return is carried on the module backplane. Logic electronics draw 400 mA from the 3.3 V rail and only 55 mA from the 5 V rail, leaving more of the power budget available for field devices. Each channel supports a discrete 5 W lamp load, and the combined power dissipation does not exceed 2.8 W, which helps support dense stacking of multiple modules without auxiliary cooling.
Frequently Asked Questions about CFL01.1-N1:
Q: How many outputs does the CFL01.1-N1 module provide?
A: The CFL01.1-N1 module has 16 outputs, providing versatile connection options.
Q: What is the output voltage supplied by the CFL01.1-N1 module?
A: Each output on the CFL01.1-N1 supplies 24 V DC for operating connected devices.
Q: What is the supported lamp load on the CFL01.1-N1 module?
A: The CFL01.1-N1 supports a lamp load of up to 5 W for lighting applications.
Q: What is the maximum total output current of the CFL01.1-N1?
A: The total output current capacity of the CFL01.1-N1 is 4 A for all outputs combined.
Q: What type of connection method does the CFL01.1-N1 use?
A: The input connection uses a 1-Wire method, simplifying installation and wiring.
