The Bosch Rexroth IndraDrive controllers are designed to monitor and control the function of electrical motors. Additional sensors and instruments are required to monitor these controllers according to the machine it is used for. Before commissioning the driver controllers, proper installation is important to ensure the motor functions in sync with the task. Some major applications of these driver controllers are food packaging machines, manufacturing of machine tools, printing, and paper processing machines etc. They are not designed to operate in extreme temperatures and in water. The drive controller consists of various drive plates which have one component in it marked by a type designation along with a type plate attached to it.
The firmware type plate accommodates a firmware, which must be separately procured if required. The master communication of this control section is done through PROFINET field bus which provides data communication through Industrial Ethernet. The Option 1 and Option 2 ports are supported by IndraDrive, Hyperface or 1Vpp Encoder. The CDB01.1C-ET-ENS-ENS-NNN-NNN-S2-S-NN-FW model does not support Option 3 and 4 ports or any other external design. The standard control panel is a single line which is not suitable for hot plug. Before turning on or off the control panel, it is mandatory to ensure that the driver controller is not running. It is ideal to plug it in before switching on the device so that it can be easily detected by the controller.
To obtain the extended diagnosis of the device, plug in the control panel along with the master communication via NC controller unit. The memory card in this controller is not under the standard scope and a standard Multimedia Card is inserted to read and store the data information.
|Option 1:||Encoder IndraDyn / Hiperface / 1 Vpp / TTL|
|Option 2:||Encoder IndraDyn / Hiperface / 1 Vpp / TTL|
|Option 3:||Not Equipped|
|Option 4:||Not Equipped|
|Safety Option:||Safe Motion (SIL2 / cat. 3 PL d)|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved