Product Description:

The CCD01.1-KE20-01-FW is a controller frame from the CCD Motion Controllers series manufactured by Bosch Rexroth Indramat for multi-axis industrial automation tasks. It houses plug-in control, I/O, and communication cards so a machine drive network can be coordinated from a single point. By providing centralized motion sequencing and diagnostics, the unit simplifies cabinet wiring and reduces setup time on assembly lines, packaging equipment, and material-handling systems.

This model uses a stand-alone card cage, so it can operate without a host rack and can be mounted directly to a plate or the rear wall of a cabinet. Up to 4 module slots are available, allowing the installed card set to match the required axis count and fieldbus functions. Internal electronics are powered from a regulated 24 VDC supply. At that voltage, the current draw is only 1 A, which helps keep power demand low and limits heat generation. Cooling follows a bottom air inlet and top air outlet pattern, and a 70 mm clearance zone must be left above the housing so warm air can escape properly. The enclosure is secured with M6 DIN 912 screws, allowing rigid fastening in applications exposed to vibration.

The available functions depend on the plug-in cards selected for the frame. A motion logic core such as the CLC-D02.3 can occupy the master slot to execute axis interpolation and command generation. For networked drives, fieldbus adapters such as DBS03.1/DPF05.2/DCF01.1 provide PROFIBUS or DeviceNet connectivity, while discrete sensing and actuation are handled by I/O boards identified as DEA28.1/DEA29.1/DEA30.1. High-speed coordination across multiple controller cages is supported by the fiber-optic link card DAQ02.1, which allows deterministic data exchange between distributed platforms without additional gateways.