CCD01.1-KE17-02-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat CCD01.1-KE17-02-FW is a motion controller from the CCD Motion Controllers series. It supports SERCOS communication standard and features a commissioning interface with RS485. The unit can control up to 40 digital drives and supports up to three types of fiber, including glass fibers with a 3.0 mm diameter and plastic fibers with a 2.2 mm diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CCD01.1-KE17-02-FW is a motion control card produced by Bosch Rexroth Indramat for installation in automated machinery that uses distributed servo axes. As a member of the CCD Motion Controllers series, it occupies a single slot in a plant-floor control rack and communicates drive commands, position data, and status signals to coordinated digital drives. In an automation cell, this controller acts as the master that sequences motion profiles, synchronizes multiple axes, and relays diagnostic feedback to higher-level PLCs or supervisory computers.
The control network is built on the real-time interface SERCOS, allowing deterministic cycle times for velocity and position loops. Initial parameter download and service tasks are completed over a serial link that uses RS485, providing a straightforward connection for setup and diagnostics. Servo drives and feedback modules connect through optical cables that terminate in the FSMA (IEC 874-2) connector style, a standard that supports low insertion loss and secure latching. Fiber segments are arranged in a Ring so each node receives data in both directions, increasing communication reliability in case of a single break. When glass fiber is used, the core diameter is 3.0 mm, providing high bandwidth and long transmission distance without excessive attenuation.
The controller can coordinate up to 40 digital servo drives while remaining within its cycle-time budget, which is the maximum number of mechanical axes supported on a single loop. For short runs inside cabinets, a plastic optical fiber with a core of 2.2 mm is accepted. Harsh routing paths can instead use reinforced POF that measures 6.0 mm in diameter for added crush resistance. All modules are mounted in the compact CCD-Box rack format, which streamlines wiring and airflow. The interface accommodates three supported fiber types, allowing the system to balance range, bend radius, and environmental durability without changing the control platform.
Frequently Asked Questions about CCD01.1-KE17-02-FW:
Q: What communication standard does the CCD01.1-KE17-02-FW motion controller use?
A: The CCD01.1-KE17-02-FW motion controller supports SERCOS as its communication standard, allowing high-speed industrial communication.
Q: What type of commissioning interface does the CCD01.1-KE17-02-FW feature?
A: This controller is equipped with an RS485 interface for commissioning purposes.
Q: How many digital drives can be connected to the CCD01.1-KE17-02-FW controller?
A: The CCD01.1-KE17-02-FW motion controller supports a maximum of 40 digital drives for comprehensive automation solutions.
Q: What fiber topology is supported by the CCD01.1-KE17-02-FW controller?
A: This unit utilizes a ring fiber topology, providing redundancy and efficient communication in motion control systems.
Q: Which connector standard and fiber types are supported by the CCD01.1-KE17-02-FW controller?
A: The part supports three types of fiber with connector standard FSMA (IEC 874-2), offering flexibility in fiber optic connections.
