CCD01.1-KE10-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277982
The Bosch Rexroth Indramat CCD01.1-KE10-01-FW is part of the CCD Motion Controllers series. It operates with a typical supply voltage of 24 V DC and allows for a supply range from 18 V to 32 V DC. This controller has 4 module slots and requires 70 mm clearance for installation.
Internal Product Review
The CCD01.1-KE10-01-FW is a Bosch Rexroth Indramat motion controller with a typical 24 V DC supply and 4 module slots for flexible system configuration. M6 DIN 912 mounting and a 70 mm clearance requirement make cabinet installation straightforward and service-friendly. A well-engineered controller for reliable machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CCD01.1-KE10-01-FW motion controller is manufactured by Bosch Rexroth Indramat and belongs to the CCD Motion Controllers series. It serves as the central processor for multi-axis drive packages, translating higher-level PLC commands into synchronized position, velocity, and acceleration references for servo amplifiers used in assembly lines, printing stations, and pick-and-place gantries. The device fits into a rack enclosure and links to neighboring modules through an internal system bus, forming an integrated automation platform that reduces external wiring while maintaining deterministic motion sequencing.
The controller operates on a DC supply that can vary from 18 V DC to 32 V DC, with a nominal value of 24 V DC. Its current draw changes with the applied voltage: at the lower boundary it requires 1.2 A, at the nominal supply it requires 1.0 A, and at the maximum input it requires 0.8 A. This operating range lets the unit share a DC supply with related automation equipment without exceeding the limits of upstream fusing or power supplies. The wide input window also helps prevent nuisance shutdowns during brief voltage dips caused by inrush currents from adjacent equipment.
Cabinet design must leave a vertical clearance of 70 mm above the heat-dissipating surfaces to maintain convection cooling. The baseplate provides four backplane connectors, so the unit can host up to 4 plug-in modules for I/O expansion or communication adaptation. The backplane layout keeps expansion modules aligned within the rack. Fastening to the panel is completed with an M6 (DIN 912) socket head screw that is tightened with an SW 5 hex key, and this mounting method secures the controller against vibration while allowing removal without disturbing neighboring modules.
