CCD01.1-KE08-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277982
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
58 Seconds
The Bosch Rexroth Indramat CCD01.1-KE08-01-FW is part of the CCD Motion Controllers series and operates with a typical supply voltage of 24 VDC. It features 4 card slots and is compatible with the CLC-D02.3 control card as well as DEA28.1, DEA29.1, and DEA30.1 I/O cards. The controller handles input currents of 1.2 A at 18 V, 1 A at 24 V, and 0.8 A at 32 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CCD01.1-KE08-01-FW is a motion controller base unit from Bosch Rexroth Indramat's CCD Motion Controllers series. Installed on a proprietary backplane, it hosts plug-in control and I/O boards that translate PLC commands into synchronized axis signals for servo drives used in packaging, assembly, and material-handling equipment. The FW suffix indicates that the operating software is delivered on a detachable memory cartridge, so the code can be changed without removing the hardware. When coupled to decentralized servo amplifiers, the module executes real-time interpolation, jogging, and homing tasks so multi-axis machinery remains in step during production.
Backplane power is 24 VDC, and the controller accepts any supply between 18 and 32 VDC, matching common cabinet rails. It provides 4 modular slots, and the first slot is reserved for the CPU card type CLC-D02.3. At 18 V the unit draws 1.2 A, at the nominal 24 V it needs 1 A, and at 32 V it falls to 0.8 A. These current levels help with fuse selection and reduce the risk of unnecessary wiring losses. Internal capacitors also help the unit ride through short supply dips so logic does not reset during contactor switching events.
The remaining slots can carry digital expansion boards DEA28.1/DEA29.1/DEA30.1 to gather local encoder or sensor signals without external gateways. A clearance of 70 mm above and below the housing is required for natural convection, and this spacing is still needed when cabinet fans are present because heat leaves mainly through the metal side panels. Mounting uses an M6 (DIN 912) socket-head screw that threads directly into the chassis, providing secure retention against vibration while allowing installation with standard tools. This mounting method helps keep the controller stable when it is installed next to neighboring drives and network wiring.
Frequently Asked Questions about CCD01.1-KE08-01-FW:
Q: What is the typical supply voltage required for the CCD01.1-KE08-01-FW controller?
A: The CCD01.1-KE08-01-FW motion controller operates with a typical supply voltage of 24 VDC.
Q: How many card slots are available on the CCD01.1-KE08-01-FW motion controller?
A: This controller is equipped with 4 card slots to support additional modules or interfaces.
Q: What is the input current when the CCD01.1-KE08-01-FW operates at 24 V?
A: At 24 V input, the CCD01.1-KE08-01-FW requires 1 ampere of input current.
Q: Which control card is compatible with the CCD01.1-KE08-01-FW motion controller?
A: The CLC-D02.3 control card is compatible with the CCD01.1-KE08-01-FW.
Q: What is the minimum required clearance for installing the CCD01.1-KE08-01-FW controller?
A: A minimum clearance of 70 mm must be provided around the controller for proper installation.
