CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
42 Seconds
The Bosch Rexroth Indramat CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T is part of the BTV30 Machine Control Terminals series and features a 10.4 inch display with a resolution of 640 x 480 pixels and 262,000 colors. It includes a Pentium 200 MHz processor, 64 MB main memory, and supports up to 8 CNC axes with an installed Interbus master. The terminal has IP20 enclosure protection, IP65 front protection, weighs 10.5 kg, and operates on 115 or 230 VAC power supply.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T is a machine control terminal produced by Bosch Rexroth Indramat within the BTV30 Machine Control Terminals series. Designed as a human-machine interface for machining centers and production cells, the unit integrates visualization, axis programming, and fieldbus supervision into one front-panel device. It allows operators to issue commands and monitor processes directly on the shop floor, reducing cabinet space and wiring compared with discrete controller and display combinations. Its compact enclosure permits mounting on swiveling arms or control pedestals where vibration and ambient contaminants are common.
Control tasks are handled by a Pentium 200 MHz processor supported by 64 MB of main memory, allowing the terminal to execute numerical control, graphics rendering, and fieldbus diagnostics without an external PC. Up to 8 CNC axes can be interpolated at the same time, and the integrated 1 MB CNC module RAM stores real-time position data for those channels. Operators view programs and machine states on a 10.4 in TFT panel that presents 640 × 480 px resolution with 262 k colors, so tool paths, alarms, and soft keys remain legible under factory lighting. Two RS-232 ports, a 10 Base-T Ethernet jack, and an installed Interbus master provide point-to-point, network, and I/O bus connectivity.
Power comes from a 115/230 VAC ±15% supply, and consumption stays below the 250 VA limit even when all interfaces are active. The aluminum front plate carries IP65 protection against dust and low-pressure water jets, while the rear enclosure is rated IP20, allowing convection cooling inside a control cabinet. With a mass of 10.5 kg, the terminal can be mounted on light pendant arms without exceeding typical moment limits. Overall dimensions of 407 × 370 × 220 mm leave room for cable bends behind the housing, and the 10 Base-T port supports remote device monitoring over the network.
Frequently Asked Questions about CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T:
Q: How many CNC axes can the CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T terminal manage?
A: This terminal can control up to 8 CNC axes, allowing for multi-axis machine management.
Q: What are the display specifications for the CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T control terminal?
A: The display offers a resolution of 640 x 480 pixels with 262,000 colors on a 10.4-inch screen.
Q: What level of protection does the front of the CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T terminal provide?
A: This model features IP65-rated front protection, making it resistant to dust and water jets on the front panel.
Q: Does the CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T terminal include an Interbus Master?
A: It comes with a built-in Interbus Master for fieldbus communication.
Q: What power supply input is required for the CFG-BTV30.2E-B1-2D-1E-NN-NN-NN-NN-NN-1T terminal?
A: The power supply supports 115/230 VAC with a tolerance of plus or minus 15%.
