Product Description:

The BTV30.2SA-28R-10C-D-FW belongs to the BTV30 Machine Control Terminals series manufactured by Bosch Rexroth Indramat. It is supplied as a machine control terminal that links operators to PLC sequences, allowing program selection, status monitoring, alarm review, and direct machine actuation from the front panel during normal operation. By combining display, keyboard, and integrated computing hardware in a single housing, the unit reduces cabinet wiring and provides a centralized operator interface so viewing and command functions remain at one panel location in automated cells that rely on real-time PLC coordination.

The terminal face is sealed to IP 65, so dust and low-pressure water jets cannot reach the electronics, while the rear housing remains IP20 for cabinet ventilation. Internal power supplies accept AC 115–230 V, 50–60 Hz, letting the unit be wired directly to common plant mains. Processing tasks such as graphics rendering and PLC dialog are handled by a Pentium 200 MHz slot CPU with integrated graphics. Visual feedback is provided by a 10.4" TFT color display that renders 640 × 480 pixel process screens, and the operator enters machine commands through 8 keys of machine-function pushbuttons positioned on the right side of the bezel.

The slide-in module occupies 372 × 335 × 200 mm inside the control cabinet, leaving room for additional drive electronics in compact enclosures where mounting space is limited. A front-mounted 3.5-inch floppy drive stores boot images and parameter sets on 1.44 MB media, allowing quick software exchange when backups or updates are needed. System memory is 1 GB, supporting local recipe storage as the PLC project grows in size. Despite the integrated display and metal bezel, the assembly weighs only 10.5 kg. The unit uses an American keyboard layout, and its integrated controls support PLC logic, local operator interaction, and routine screen-based machine commands.