Product Description:

The BTV30.2SA-28B-11C-D-FW operator terminal is produced by Bosch Rexroth Indramat within the BTV30 Machine Control Terminals series. This machine control terminal is intended for SPS-based automation cells and combines visualization with manual input in one panel. By linking drives, PLCs, and supervisory networks, the panel gives operators direct access to motion parameters, diagnostics, and recipe data during production changeovers. Because the display and input functions are integrated into one housing, the machine can be monitored and controlled from a single point. This layout suits packaging, handling, and other production equipment that relies on local operator interaction.

Core hardware centers on a Slot CPU with a Pentium 200 MHz processor and an integrated graphics controller, so screen refresh and application execution run on the same platform without add-on cards. The interface appears on a 10.4-inch TFT color display with a native resolution of 640 × 480 pixels, which presents operating data in standard VGA format and keeps status screens easy to read. Power is supplied from industrial mains in a range of AC 115 to 230 V, and the internal supply accepts 50 to 60 Hz input for use in common North American and European installations. This arrangement leaves the internal bus available for fieldbus or application-specific expansion rather than basic display hardware.

For local data exchange, the terminal includes a 3.5-inch 1.44 MB disk drive, allowing recipe files and other application data to be transferred without permanent network access. The front bezel is rated IP65, while the rear housing remains at IP20 so convection cooling can occur inside a protected cabinet. The aluminum slide-in cassette measures 372 × 335 × 200 mm, which fits common 19-inch rack depths and leaves room for cable bends behind the unit. Its operating mass is 10.5 kg, and it also includes an American-layout membrane keyboard for BOF and MUI functions plus dedicated SPS application files that work with Series 30 controller programs.