Product Description:

The BTV30.2PA-24R-55C-D-NW is a machine control terminal produced by Bosch Rexroth Indramat and assigned to the BTV30 Machine Control Terminals series. The unit serves as the operator interface for CNC and PLC installations. It combines the display, processor, and hard-wired keys into a single front-panel assembly, so motion sequences, status messages, and manual overrides can be handled directly on the production floor.

The terminal presents data on a 10.4" TFT color display, 640 × 480 pixels, supplying VGA graphics that match common HMI screen templates. Computational tasks are executed by a Pentium 200 MHz CPU mounted on a slot card with integrated graphics, giving sufficient throughput for visualization and NC sequence handling. Power is taken from a AC 115…230 V, 50…60 Hz mains source, allowing installation in plants that use either European or North American utility levels without a separate transformer. Environmental sealing follows a Front panel IP 65, housing IP 20 scheme; the operator face withstands dust and jetting fluids, while the rear is intended for cabinet environments. Physical integration is simplified by a slide-in cassette that measures 372 × 335 × 200 mm, so the panel depth and cutout can be planned before cabinet wiring begins.

Input ergonomics are refined through an American (US) keyboard layout that matches standard PC key positions, while the dedicated machine buttons arranged as 8 keys on the right-hand side offer direct cycle start, feed hold, or tooling commands without software navigation. Program and firmware loading can be performed with the integrated 3.5" 1.44 MB disk drive, which also supports field diagnostics when network access is unavailable. The enclosure weighs 10.5 kg, which helps damp vibration once it is bolted into a door or swing arm.