BTV30.2EA-64R-33C-D-FW

Product Description:

The BTV30.2EA-64R-33C-D-FW control terminal sits in the Bosch Rexroth Indramat family under the BTV30 Machine Control Terminals lineup. This model uses an Intel Celeron processor at 400 MHz, giving solid processing power for typical factory controls. Right on the front sits a 10.4-inch TFT color touchscreen, which is big enough for clear menus and pretty easy button hits, not too crowded. Display resolution gets marked at 640 x 480 pixels, so diagrams and PLC info don’t turn fuzzy on screen. In any industrial workplace, surviving dust and splashes is important, and the front panel’s IP65 protection keeps it going even if water jets hit it.

All around the edges, various ports line up—this terminal supports Ethernet, USB, RS232, and RS485 interfaces, which works fine for hooking up to warehouse printers or remote diagnostics. The unit handles its job with 64 MB of RAM, not much by today’s standard, but enough for quick PLC instructions and touchscreen controls. Operation runs steady using 24 V DC as the power supply, which matches standard shop voltages, and the maximum power consumption is 35 W—about what most mid-sized control terminals use. Slot in a CompactFlash card when storage gets tight, and settings or logs save over easily.

Panel-mount hardware takes care of installation, tucking into enclosures without sticking out. At only 0°C to +45°C for working temperature, it will serve best in climate-controlled cabinets rather than hot forging lines. The operator facing the terminal gets direct control from a tough, easy-to-clean screen. The design style-built for automation—usually means every port, pixel, and watt translates directly to less maintenance and fewer repair calls. Where production lines need dependable input control with wired sensors and some modern network options, this unit checks boxes for reliable performance and basic digital convenience.