BTV30.2EA-64R-10C-D-FW

Product Description:

The BTV30.2EA-64R-10C-D-FW comes from Bosch Rexroth Indramat’s BTV30 Machine Control Terminals series, a line mostly built for touchscreen display controls out in the field or on panels. This control terminal stands out straight off with a 10.4-inch TFT color display, bright enough for reading system data and commands in factory lighting. Right underneath, the 64-key membrane keyboard sits built-in, making button presses possible even with work gloves on. A body with panel mounting points helps fit the terminal to cabinets or other equipment faces, so it sets up wherever a set point is needed without hassle.

Under the surface, the interface list stretches out to take RS232, CAN, and Ethernet signals, so it latches onto different controllers or machine networks without issue. IP65 protection is stacked on the front face, and this guard blocks dust and water right where most dirt settles in; for industrial work spots, at least some grit and splashing is always in play. Power plugs in at 24 VDC, and a Max 40 W draw means power supplies don’t get overworked. The terminal lasts longer thanks to a coated housing, and hands tapping on it all day won’t wear the finish down much. Cables feed in from behind, and systems run quietly without a lot of heat.

When jobs demand a setup that won’t short out in mixed or shifting temperatures, the 0°C to 45°C operating range holds up over long operating hours. Total panel weight sits at Approx. 4.8 kg, keeping things manageable during installs or swap-outs. Different bus systems like INTERBUS or PROFIBUS are by configuration, giving each install a way to fit older lines or modern digital gear. Special attention goes to the 640 x 480 pixel resolution; it looks sharp for plant graphics and menus, avoiding confusion on status screens.