Product Description:

The BTV30.2EA-64B-11C-D-FW is a machine control terminal in the BTV30 Machine Control Terminals series. It serves as both the operator interface and the CNC execution platform for milling, turning, and drilling equipment used on automated lines. By combining visualization, program storage, and axis control in one housing, the unit lets the front panel run part programs, display process data, and accept operator input during machine operation. This arrangement keeps machine interaction centralized at the control station and supports routine monitoring, setup changes, and program handling at the machine.

Central processing is handled by a Pentium 200 MHz slot CPU that includes an integrated graphics controller, providing enough throughput for real-time interpolation and responsive screen updates. The terminal uses 64 MB of SDRAM, which allows part programs and PLC data to remain in working memory during normal operation. Operator feedback appears on a 10.4" TFT color display, and its resolution of 640 × 480 pixels presents tool paths, alarm lists, status pages, and soft keys clearly. Power is supplied from AC 115…230 V, so the terminal can be connected directly to facility power in many control cabinets without a separate transformer.

During installation, the operator panel is mounted from the front, and the enclosure supports line frequencies of 50…60 Hz for use in different regions. Protection is rated at IP 65 on the front and IP 20 on the rear housing, so the display side resists dust and fluid spray while the back is intended for cabinet-protected areas. The slide-in assembly measures 372 × 335 × 200 mm, which suits standard 19-inch rack arrangements when used with appropriate rails and helps the terminal fit established cabinet layouts. A 3.5-inch 1.44 MB floppy drive is included for file transfers, the American-layout keyboard supports direct G-code entry, the unit is Version 2, and the total mass is 10.5 kg.