BTV30.2EA-28R-33C-D-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
18 Seconds
The Bosch Rexroth Indramat BTV30.2EA-28R-33C-D-FW is a machine control terminal in the BTV30 Machine Control Terminals series. It features a 10.4 inch TFT color display with a resolution of 640 x 480 pixels and uses a Pentium 200 MHz processor. The unit has a 3.5 inch, 1.44 MB disk drive and American layout keyboard, with a total weight of about 10.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTV30.2EA-28R-33C-D-FW machine control terminal is produced by Bosch Rexroth Indramat and belongs to the BTV30 Machine Control Terminals series. As a human-machine interface for CNC systems, it hosts operator input, display, and basic computing resources so that motion sequences and tool data can be managed directly on the shop floor. Its panel design lets operators review machine status and enter commands from a single front-mounted interface. This arrangement keeps the display and input hardware together in one enclosure.
It draws from a nominal mains supply of AC 115…230 V, 50…60 Hz, allowing installation on worldwide power grids without a step-down transformer. Computing tasks and graphic output are handled by a Pentium 200 MHz slot CPU that includes an integrated graphics controller, so no separate video card is required. Visual feedback is presented on a 10.4 in TFT color display with 640 × 480 pixels, giving operators full VGA resolution for part programs, alarm lists, and status screens. Program storage and data transfer are supported by the built-in 3.5 in, 1.44 MB disk drive, which accepts standard DOS-formatted diskettes for quick recipe loading. The sealed aluminum bezel meets IP 65 at the front, which blocks dust ingress and low-pressure water jets during cleaning.
In addition to the display, the right side carries 8 machine function keys whose labeling can match user macros in the BOF/MUI environment. Alphanumeric entry relies on the American (US) keyboard layout, simplifying operator training in plants that standardize on US key positions. The slide-in housing occupies 372 × 335 × 200 mm, so retrofits must allow that volume inside the cabinet, while the rear surfaces carry the housing IP 20 rating and the mains connector. Despite its steel chassis and fan assembly, the unit weighs only 10.5 kg. Version 2 supports CNC applications without export restrictions, and the assembly is identified as Series 30 within the overall family.
Frequently Asked Questions about BTV30.2EA-28R-33C-D-FW:
Q: What type and resolution of display is included on the BTV30.2EA-28R-33C-D-FW machine control terminal?
A: The BTV30.2EA-28R-33C-D-FW is equipped with a 10.4-inch TFT color display providing a resolution of 640 x 480 pixels.
Q: What kind of disk drive is installed on the BTV30.2EA-28R-33C-D-FW?
A: This terminal features a 3.5-inch disk drive with a 1.44 MB capacity already mounted.
Q: What level of protection rating does the BTV30.2EA-28R-33C-D-FW provide?
A: The front panel of the BTV30.2EA-28R-33C-D-FW has an IP 65 protection rating while the housing is rated at IP 20.
Q: What mains voltage and frequency does the BTV30.2EA-28R-33C-D-FW support?
A: This model operates at a nominal mains voltage of AC 115 to 230V and a frequency of 50 to 60Hz.
Q: What processor does the BTV30.2EA-28R-33C-D-FW machine control terminal use?
A: The BTV30.2EA-28R-33C-D-FW is powered by a Pentium 200 MHz Slot CPU with integrated graphics.
