Product Description:

The BTV30.2CA-64B-11C-D-FW machine control terminal is manufactured by Bosch Rexroth Indramat for the BTV30 Machine Control Terminals series. Designed for supervisory roles on machining centers and transfer lines, the panel combines visualization, command entry, and embedded processing in one operator station. It provides the interface used to start, stop, and adjust programmed CNC sequences at the production cell. This arrangement keeps the display and control functions close to the machine, so routine status checks and command changes can be made directly at the enclosure door.

Its operator feedback is delivered through a 10.4" TFT color display that renders process graphics at 640 x 480 pixels. A floppy drive accepts 3.5-inch media, so files up to 1.44 MB can be loaded without network access. The onboard Pentium 200 MHz slot CPU works with 64 MB of SDRAM to handle HMI screens and control-related processing. Electrical supply flexibility is provided by a nominal input of AC 115 to 230 V at 50 to 60 Hz, allowing the panel to be used in both North American and international control cabinets. To resist dust and coolant splash during shop-floor use, the front panel has an IP65 rating, and passive ventilation cools the internal electronics without a separate fan assembly.

The key area follows the American layout used in BOF and MUI applications, so symbol placement matches common G-code entry habits. The steel housing behind the sealed bezel is rated IP20 and fits a slide-in frame measuring 372 x 335 x 200 mm, which supports installation in cabinet doors and fixed machine panels. The terminal is listed as Version 2. When installed, the unit adds 10.5 kg to the cabinet door, which helps explain the need for a rigid mounting surface and suitable hinges. The enclosed rear housing also separates internal electronics from the work area while keeping the front interface accessible.