BTV30.2CA-24R-55C-E-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
57 Seconds
The Bosch Rexroth Indramat BTV30.2CA-24R-55C-E-FW is part of the BTV30 Machine Control Terminals series and is designed for CNC applications. It features a 10.4 inch TFT color display with a resolution of 640 x 480 pixels, an American keyboard layout, 8 machine function keys, and a Pentium 200 MHz processor. This machine control terminal operates on AC 115 to 230V at 50 to 60Hz and weighs approximately 10.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTV30.2CA-24R-55C-E-FW operator panel is produced by Bosch Rexroth Indramat as part of the BTV30 Machine Control Terminals series. It serves as the main interface between a CNC controller and machine equipment, combining visualization, soft-key operation, and numerical data entry in one housing. This terminal is intended for CNC applications that are subject to export restrictions, and it is configured for restricted market deployment. In normal use, it allows machine status pages, control functions, and entered values to be managed from a single front-mounted interface.
The display section uses a 10.4-inch TFT color display with a native resolution of 640 × 480 pixels, giving operators a clear full-screen view without an external monitor. An American (US) keyboard layout is provided for BOF/MUI commands, so key positions match the symbols commonly used in U.S. CNC data entry. Motion and cycle adjustments are issued through 8 keys mounted on the right side, allowing frequently used machine functions to be selected quickly. Processing is handled by a Pentium 200 MHz slot CPU with an integrated graphics controller, which removes the need for a separate video card. This arrangement supports local display of program information, status messages, and operating menus in one panel. For cabinet power distribution, the terminal accepts AC 115 to 230 V at 50 to 60 Hz, allowing connection to common single-phase power sources.
The slide-in chassis measures 372 × 335 × 200 mm, which suits standard floor-cabinet installation without extra brackets. The front face has an IP65 front panel rating, while the rear housing is IP20 for enclosed mounting inside the cabinet. This layout allows the sealed front to remain exposed at the machine while the rear section stays inside the control enclosure. With a mass of 10.5 kg, the unit can be handled without a lifting device during installation. The panel is built in Version 2 and uses series code 30.
Frequently Asked Questions about BTV30.2CA-24R-55C-E-FW:
Q: What type and resolution of display does the BTV30.2CA-24R-55C-E-FW control terminal have?
A: The BTV30.2CA-24R-55C-E-FW is equipped with a 10.4" TFT color display featuring a resolution of 640 x 480 pixels.
Q: What protection rating does the front panel and housing of the BTV30.2CA-24R-55C-E-FW provide?
A: This terminal operates securely in environments requiring IP 65 protection at the front panel and IP 20 at the housing.
Q: What processor is included in the BTV30.2CA-24R-55C-E-FW terminal?
A: The BTV30.2CA-24R-55C-E-FW uses a Pentium 200 MHz slot CPU with integrated graphics.
Q: How many machine function keys are on the BTV30.2CA-24R-55C-E-FW control terminal and where are they located?
A: This model features eight machine function keys positioned on the right-hand side for operational convenience.
Q: What is the nominal mains voltage requirement for the BTV30.2CA-24R-55C-E-FW terminal?
A: The BTV30.2CA-24R-55C-E-FW is designed to operate on AC voltages from 115 to 230V at 50 to 60Hz.
