BTV30.1SA-16R-50B-D-000100-FW

Product Description:

The BTV30.1SA-16R-50B-D-000100-FW belongs to Bosch Rexroth Indramat’s BTV30 Machine Control Terminals and is set up with enough options to handle plenty of jobs on factory floors and work sites. Its 16-inch display uses a TFT color LCD panel, lining up at a clean 1280 x 1024 pixels, so readings look sharp and it fits plenty of info right on the front. For operators dealing with gloves or standing at the panel all shift, the input goes through membrane keys and function keys, giving actual button feel and fast setup when using menus.

No need to sweat about spills or stray dust, because the IP65 front panel blocks out most water and debris that fly around industrial spaces. On the wiring side, the design comes with RS232, RS485, and Ethernet interfaces, so connections slot into almost any automation setup out there. Running steady off 24 VDC with a max power use of 80 W, the terminal pairs up reliability with low draw, and the panel mount format lets it lock right into control cabinets. Size checks in near 420 x 340 x 110 mm, and at just 8 kg, swapping or installing one doesn’t add strain for techs.

Operational range means this terminal hangs in there between 0°C and +50°C when running, and if spares get kept cold, it handles storage from -20°C up to +60°C. That rugged housing adds protection so the insides stay undamaged if actual plant conditions throw shocks or wide swings in temperature. Bosch Rexroth Indramat posts each device with factory-programmed firmware (the FW version updates per unit), so no fuss over compatibility when fitting into older or newer systems. Units like this end up on packaging stations, material lines, machinery with feedback circuits—any spot where display size, durability, and fuss-free connections keep a production day on schedule.