Product Description:

The BTV30.1PD-32R-50B-D-000000-FW is a machine control terminal produced by Bosch Rexroth Indramat for the BTV30 Machine Control Terminals series. It combines PC-based computing, operator input, and visualization in one panel so the machine interface does not require a separate external computer. The terminal is used for motion-related commands, diagnostics, parameter entry, alarm acknowledgment, and the display of process curves during automated operation. Its integrated format also allows direct communication with compatible Indramat drives or CNC controllers from the front of the machine.

A Pentium 166 MHz processor runs the control software and provides enough performance for visualization tasks and soft PLC functions. The processor works with 32 MB of RAM, giving the system working memory for the operating environment and active control data. Permanent storage is provided by a hard drive with a capacity of at least 500 MB, which can hold part programs and local system files. Process information is shown on a 10.4-inch TFT color panel with 640 × 480 resolution, making menus, alarms, and graphics easy to read on the machine front. The front housing is rated IP 65/IP 20, so the operator side is protected against dust and light washdown while the rear side is intended for cabinet installation.

A built-in 3.5-inch, 1.44 MB disk drive allows data backup by standard floppy media. Direct control access is provided by 8 function keys on the right side, which can be assigned to machine-specific commands such as jog functions or auxiliary actions. The slide-in housing measures 372 × 335 × 200 mm, which supports cabinet door installation without requiring a separate desktop enclosure. The unit has a mass of 10.5 kg, and the keyboard layout is German BOF for legacy control environments. The application class is PC, and the unit uses hardware release 30 with version 1.