Product Description:

The BTV30.1EA-32R-50C-D-130200-FW is a machine control terminal produced by Bosch Rexroth Indramat within the BTV30 Machine Control Terminals series. The panel combines the display, keyboard, and computing hardware in one unit so a single module can command drives and I/O in CNC machining cells. It is listed for CNC use without export restriction. By placing the operator interface and PC hardware in a shared enclosure, the terminal keeps control functions centralized at the machine. Its role is to present process data, accept operator input, and relay instructions back to the motion control system.

Its computing core is a Pentium 166 MHz slot-based PC with onboard graphics, allowing VGA output directly to the front-mounted 10.4" TFT color display at a native resolution of 640 × 480 pixels. User programs run with 32 MB of RAM, and local storage starts with a minimum 500 MB hard drive so part programs, alarms, and diagnostic files can remain on the terminal. Because graphics are generated internally, the unit can display menus, status pages, and alarm information without a separate video controller. The power inlet accepts 115/230 VAC ±15%, and the American-layout membrane keyboard with eight dedicated machine function keys on the right side helps shorten data entry during setup and production changes.

For removable media logging, a front-accessible 3.5" 1.44 MB disk drive is mounted behind the sealed bezel. The operating face carries a rating of IP 65, while the rear housing is IP20, so chips and coolant are kept away from the front interface and convection cooling can still occur inside the cabinet. The slide-in chassis measures 372 × 335 × 200 mm and weighs 10.5 kg, which suits existing BTV30 rack space. This layout keeps the display and keyboard accessible at the machine front while the rear section remains inside the cabinet where airflow is available.