Product Description:

The BTV30.1CD-32R-50B-D-140200-FW is a machine control terminal produced by Bosch Rexroth Indramat and supplied within the BTV30 Machine Control Terminals series. Installed on CNC workstations, it provides the human-machine interface that lets operators issue commands, view process data, and load part programs directly at the production line. The terminal combines display, computing, and front-panel control functions in one unit, so routine machine interaction can be handled at the point of operation. This arrangement allows the CNC system to present status information and accept manual entries without requiring a separate office-style computer beside the machine.

The operator views data on a 10.4-inch TFT color display that renders 640 × 480 pixels, which is adequate for tool paths, status dialogs, and diagnostic screens. Computational tasks such as interpolation and PLC logic are handled by a Pentium 166 MHz processor working with 32 MB RAM, a combination that supports mid-1990s Rexroth CNC software while preserving capacity for custom macros. Nonvolatile storage is provided by a minimum 500 MB hard drive, and a front-mounted 3.5-inch 1.44 MB disk drive allows local file transfer when network access is not available. The unit is arranged for German-language BOF layouts, and eight dedicated machine function keys on the right side provide direct access to commonly used cycles or axis selections. Local storage keeps part programs, screen files, and machine data available at the terminal so the control can continue to operate without relying on a separate network connection.

The front panel has an IP65 rating against dust and low-pressure water jets, while the rear housing is rated IP20 for installation inside a control cabinet. The slide-in module dimensions of 372 × 335 × 200 mm suit 19-inch rack installations with matching cutouts, and the terminal has a mass of 10.5 kg for mounting on standard swing arms or panel brackets. Its version 1 configuration is intended for export-restricted CNC applications. The rear section remains ventilated, so the unit is intended for enclosed cabinet mounting rather than open exposure on the machine exterior.