Product Description:

The BTV30.1CD-08R-50B-D-030200-FW is a machine control terminal produced by Bosch Rexroth Indramat within the BTV30 Machine Control Terminals series. It serves as the operator interface on CNC stations, combining display, data storage, and dedicated keys so that the numerical control and the human-machine interface reside in one front-mounted unit. By integrating these elements, the terminal supplies motion commands and status information directly to the automation controller without separate peripheral panels. It is suited to control stations where operators need direct access to program data, status messages, and machine functions at the front of the cabinet.

Control execution relies on a Pentium 166 MHz processor, providing sufficient cycle time for part programs and screen refresh. Visual feedback is supplied by a 10.4 in. TFT color display with 640 × 480 pixels, allowing parameter pages and path graphics to be shown clearly. For removable media, a 3.5 in., 1.44 MB diskette drive is mounted behind the bezel, enabling quick transfer of NC files. Local storage for system software and machining libraries is secured on a minimum 500 MB hard drive. Eight configurable pushbuttons on the right side act as direct machine commands, and the unit includes 8 keys for repetitive functions such as cycle starts or tool-change calls. The terminal is supplied with a German BOF keyboard layout for text entry and code editing, and it is approved for CNC applications subject to export regulations.

The front panel carries a IP 65 rating against dust and low-pressure water jets during machine operation. The rear housing meets IP 20 when installed in a protected cabinet, which separates the operator-facing section from enclosed electronics. Cabinet fitment is guided by a slide-in frame measuring 372 × 335 × 200 mm. The assembled unit weighs 10.5 kg, so the mounting bracket must support the installed load.