Product Description:

The BTV30.1CA-64R-10D-D-120200-FW is an operator terminal produced by Bosch Rexroth Indramat for the BTV30 Machine Control Terminals series. Built for CNC installations subject to export control, the unit combines visualization, data entry, and soft-key control in one front-panel assembly. In an automated cell, it links drives and numerical controllers, allowing operators to load part programs, adjust feed rates, and monitor axis status directly at the machine. This terminal serves as the human-machine interface between the control computer and the equipment. That arrangement keeps operating prompts and machine status in a single location instead of splitting them across separate panel devices.

The terminal uses a Pentium 166 MHz processor together with 64 MB RAM, providing local computing capacity for screen handling and data processing. Visual feedback is delivered by a 10.4-inch TFT display with 640 × 480 pixels, so operators can view G-code, diagnostics, and axis positions at a glance. A 1.44 MB disk drive accepts standard 3.5-inch diskettes for transferring small job files, while 8 function keys on the right side of the bezel provide direct access to common machine commands. The alphanumeric input follows the American keyboard layout, and the front panel carries an IP65 protection rating that helps shield the display and keys from dust and low-pressure water spray.

The electronics are mounted on a slide-in frame measuring 372 × 335 × 200 mm, so the installation can be planned around a known cabinet space. The assembly weighs 10.5 kg, which is relevant for door or swing-arm mounting. Hardware Version 1 is the initial release within the 30 series, and the terminal relies on a host computer with at least 1 GB of storage and a 200 MHz CPU. The rear housing is rated IP20, so it must be installed inside a protected enclosure. This arrangement supports integration with surrounding control hardware while keeping the sealed operating surface exposed to the machine side.