Product Description:

The BTV20.2CA-64B-10C-D-120500-FW is an operator panel produced by Bosch Rexroth Indramat for the BTV20 Machine Operator Panels series. It serves as a human-machine interface that links CNC or PLC controllers to machine equipment, giving operators direct access to motion commands, diagnostics, and process data through its integrated keys and display zones, so status messages, active modes, and operator inputs can be handled from one front-mounted interface. Within an automation cell, this panel is part of the BTV Panel product family and uses position code 20, supporting standard machine tool control tasks without external supervisory modules.

The panel boots from a base system that requires a minimum of 1 GB of RAM and a processor clock of 200 MHz, so compatible embedded computers can run the resident visualization software without delay. It accepts a single-phase supply of AC 115 to 230 V, and the control electronics operate on mains frequencies of 50 to 60 Hz. Sixteen membrane switches are arranged as 16 machine function keys, and each key can be linked to user-defined PLC bits for spindle, axis, or coolant commands. A standard membrane keyboard below the screen provides alphanumeric entry for G-code blocks, parameter edits, and alarm acknowledgments. The primary storage device is a 3.5-inch disk drive that accepts DOS-formatted media for software updates or part-program transfers in legacy cells where network connections are not always available.

The configuration tag Design 2 identifies the enclosure revision that mates to MSA mounting frames. It also supports rear I/O modules without adapter plates, which simplifies installation within compatible panel cutouts and allows add-on interfaces to be fitted at the rear of the unit. Control behavior follows the MTC panel function type, so the soft keys are pre-labeled for mode, tool, and channel pages used in Bosch Rexroth CNC layouts.