BTV01.4CA-32T-50D-AS-DL-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat BTV01.4CA-32T-50D-AS-DL-FW is a visualization terminal in the BTV01 Visualization Terminals series. It features a 10.4 inch color TFT display with a resolution of 640 x 480, and is powered by a minimum Pentium II 200 MHz processor with 32 MB RAM. The device supports Ethernet and RS232C interfaces, has an IP65 front panel protection, and accepts input voltages of 115 or 230 VAC with autorange.
Internal Product Review
The BTV01.4CA-32T-50D-AS-DL-FW is a Bosch Rexroth visualization terminal with a 10.4-inch color TFT display. Front panel IP65 protection and a 115/230 VAC autorange supply support dependable integration in industrial operator stations. A 200 MHz Pentium II processor with 32 MB RAM gives the terminal solid HMI performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTV01.4CA-32T-50D-AS-DL-FW belongs to the BTV01 Visualization Terminals series manufactured by Bosch Rexroth Indramat. Classified as a visualization terminal, it provides machine operators with a built-in display and alphanumeric keyboard for direct control and status monitoring in automated cells. A Pentium II processor runs at 200 MHz and works with 32 MB of RAM and a minimum 0.5 GB hard drive to run Rexroth runtime software without an external PC.
Visual data appear on a 10.4-inch TFT color panel with a resolution of 640 × 480 pixels, providing full-screen clarity for diagnostic graphics. Programs can be loaded or backed up through an externally cabled 3.5-inch, 1.44 MB disk drive, while high-level networking is available through the additional Ethernet 10BASE-T port. Point-to-point connections are supported by the COM 1 RS-232C and COM 2 SIS interfaces. Two ISA slots accept controller cards; one factory adapter provides RS-232/RS-485 connectivity, and the other position remains available. The housing follows Design 4 and Line 01, and it withstands static magnetic fields up to 6 gauss. Typical heat loss is 65 W and rises to a maximum of 200 W under peak loading, so cabinet ventilation must accommodate the full thermal load.
The front foil and keypad meet IP65 when panel-mounted, while the rear enclosure is rated IP20, indicating that the internal electronics require a protected cabinet. Reliable operation is supported from +5 °C to +45 °C, and the unit can be stored from −20 °C to +60 °C without damage. Supply power is drawn from a wide-range 115/230 VAC ±15% input with automatic voltage selection, allowing the terminal to operate on standard North American or European mains. The 32-key alphanumeric keyboard provides direct data entry for setpoints and file names without requiring an external PC keyboard.
