Product Description:

The BTC06.2A-F-EN3-FW handheld unit is produced by Bosch Rexroth Indramat and belongs to the BTC06 Manual Control Units series. It serves as a portable operator station for machine tools and automated cells. The unit provides on-site access to jogging, teaching, and parameter entry functions that are normally limited to a fixed console, making it useful where local machine control is needed away from the main panel.

The housing measures 315 × 180 × 57 mm, allowing single-hand support while the optional handle offers a longer reach during operation. A monochrome, backlit LCD display with a resolution of 240 × 128 pixels presents full-graphic pages for axis position, override data, and alarm texts. The electronics are powered from a single 24 V DC supply that may vary between 20 and 30 V, so the unit can share the same low-voltage bus that feeds sensors and I/O modules. Communication to the controller is selectable through RS-232C and RS-422A/RS-485 links, which cover both short and long cable installations. A built-in emergency-stop button opens two redundant circuits, allowing the pendant to participate in the machine safety loop.

The polycarbonate enclosure is rated at IP65, which blocks dust ingress and exposure to high-pressure water jets on shop floors. Despite the rugged shell, the weight remains only 1.3 kg, which helps keep the unit easy to handle during extended use. Reliable performance is maintained between 0 to +55 °C, matching common cabinet and ambient limits. Input is handled by a polyester-foil keyboard that offers 48 keys arranged in numerical, function, and axis groups, and the flat layout is kept simple because there is no handwheel or override potentiometer. A three-stage, dual-circuit enable switch on the rear provides controlled activation, and the unit is identified as design code 2 with line 06.