Product Description:

The BTA05.2-DB control board is manufactured by Bosch Rexroth Indramat for the BTA05 Machine Control Boards series. It is intended to house operator push-buttons, indicator lamps, and related terminals while forming a sealed interface between interior electronics and the factory floor. In industrial automation cabinets, this board provides a predefined mechanical envelope so machine builders can standardize door layouts and maintain ingress protection across multiple equipment models.

Its housing is finished in RAL 7035 light gray, a neutral shade that blends with common cabinet coatings and keeps legends legible. A depth of 67.5 mm restricts the projection of the assembly so it clears door braces and adjacent modules. Protection against dust and water jets is ensured by a front-panel rating of IP65, making external splash guards unnecessary. The visible face consists of a varnished aluminum plate that resists corrosion and supplies rigidity for tightening fasteners without warping. Overall height reaches 112 mm, providing vertical room for the five factory-fitted control elements while remaining compatible with standard 45 mm pitch rail spacing. Each device occupies an element size of 22.5 mm, aligning with modular spacing rules used in many machine panels.

Mounting is handled through four apertures with a 4.5 mm hole diameter that accept metric hardware; the preferred fastener is an M4 x 16 screw used together with an M4 nut. The assembly can be installed at elevations up to 1500 m without functional derating, supporting deployment in multistory production halls. Six installation slots coordinate with the 99 mm mounting height and the 305 mm mounting width, giving flexibility for wiring changes or replacement of the five control elements. The total front width is 318 mm, matching the bonded polyester film surface cover and simplifying gasket selection where the board adjoins neighboring enclosures.