RC2-2/20 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R902076100
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RC2-2/20 is part of the BODAS Controllers series and features a C164CI microcontroller with a clock frequency of 20 MHz. It includes 2 analog current inputs, 2 analog voltage inputs, 2 frequency inputs, and supports an 8 amp maximum loaded current with IP65 connector protection. The unit offers a 52-pin mating connector, a sensor supply voltage of 5 volts, and provides both a CAN interface and RS232 port for communications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RC2-2/20 controller is a member of the BODAS Controllers series produced by Bosch Rexroth Indramat for mobile and stationary automation. It supervises proportional valves, sensors, and communication buses, acting as the programmable logic core inside electro-hydraulic drive systems.
A 16-bit C164CI microcontroller operates at a clock speed of 20 MHz, giving the unit adequate cycle time for closed-loop tasks. Program code resides in 256 kByte of Flash EPROM, while transient variables occupy 128 kByte of RAM; a separate 2 kByte EEPROM stores calibration data that must survive power loss. Two analog current inputs and two analog voltage inputs feed process variables directly to the CPU, and a single CAN interface forms the gateway to vehicle multiplex networks. The housing routes all I/O through a 52-pin mating connector, and its output stage can deliver up to 8 A for solenoid coils without derating.
A quiescent draw of 250 mA keeps battery load low when valves are idle, yet the design tolerates automotive load-dump events up to 70 V without damage. Internal regulation provides a stabilized sensor rail at 5 V ±0.1 V; this rail powers frequency sensors connected to the two dedicated frequency inputs. One RS-232 port is available for service diagnostics and application flashing. Environmental sealing with connector protection achieves an IP65 rating, enabling installation on exposed machine frames.
Wake Industrial stocks this controller, offers same-day shipping for urgent orders, and backs every purchase with a 1-year warranty; quotations remain valid for 30 days to aid maintenance budgeting.
Frequently Asked Questions about RC2-2/20:
Q: How many analog current inputs are available on the RC2-2/20 controller?
A: The RC2-2/20 provides two analog current input channels for sensor integration or control signals.
Q: How many CAN interfaces does the RC2-2/20 from Bosch Rexroth have?
A: This controller is equipped with a single CAN interface for communication with compatible automation components.
Q: What microcontroller and clock frequency does the RC2-2/20 use?
A: The RC2-2/20 uses a C164CI microcontroller running at a clock frequency of 20 MHz.
Q: What is the maximum loaded current specification for the RC2-2/20 controller?
A: The maximum loaded current supported by the RC2-2/20 is 8 A, suitable for standard controller functions.
Q: What is the protection rating of the RC2-2/20 BODAS Controller when fully assembled with its connector?
A: The RC2-2/20 is protected to an IP65 level when used with its mating connector, preventing dust and water ingress.
