RC12-10/30 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R917008181
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RC12-10/30 is a controller from the BODAS Controllers series. It supports a maximum tightening torque of 10.0 Nm and is designed for mounting with an M6 screw. The unit allows a maximum harness spacing of 150 mm and can be stored at temperatures between -10 °C and +30 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RC12-10/30 is an electronic mobile-hydraulic controller manufactured by Bosch Rexroth Indramat for the BODAS Controllers series. Installed on vehicles or machinery, it processes signals from pressure, speed, and position sensors to command proportional solenoids. That control role supports stable regulation of pumps, hydraulic motors, and auxiliary actuators in demanding mobile equipment.
Correct storage and mounting conditions help preserve calibration and connector sealing over time. Average warehouse humidity should stay below 60% to reduce the risk of condensation on the conformally coated circuit board. Wiring looms should be routed so harness spacing does not exceed 150 mm, which helps limit cable strain at the sealed connector and keeps the installation orderly.
When fastening the aluminum housing, screw preload is limited to 10.0 Nm, which protects the threads while maintaining solid contact with the mounting surface. Bosch Rexroth also specifies a minimum underside gap of 1 mm for drainage and a mounting-surface evenness of 0.5 mm so the gasket can seat evenly against dust. The recommended attachment hardware is an M6 screw set, and the controller may remain packaged for up to 100 h at temperatures reaching +40 °C during short-term holding periods.
Wake Industrial provides a 1-year warranty on each unit and offers same-day shipping on qualifying orders for customers working under tight maintenance schedules. The chat tool available on the website can be used for questions about type codes or error indicators. This concise support information keeps the description focused on operating and handling requirements during storage, mounting, and commissioning for technicians in the field.
Frequently Asked Questions about RC12-10/30:
Q: Which series does the RC12-10/30 controller belong to?
A: The RC12-10/30 controller is part of the BODAS Controllers series from Bosch Rexroth Indramat.
Q: What is the maximum tightening torque for the RC12-10/30 controller?
A: The maximum tightening torque recommended for the RC12-10/30 is 10.0 Nm.
Q: What screw size is recommended for mounting the RC12-10/30 controller?
A: An M6 screw is recommended for mounting the RC12-10/30 controller.
Q: What storage temperature range is supported by the RC12-10/30 controller?
A: The RC12-10/30 controller can be stored in temperatures ranging from -10 °C to +30 °C.
Q: What is the maximum average storage humidity for the RC12-10/30 controller?
A: This controller can be exposed to a maximum average storage humidity of 60%.
