Product Description:

The ADP164C-B35OB2-BS0H-A2N2 three-phase induction motor is produced by Bosch Rexroth Indramat and belongs to the ADP 3-Phase Induction Motors series. The unit converts electrical energy into mechanical rotation for conveyor lines, packaging axes, and other automated machinery that rely on continuous torque from a squirrel-cage rotor. Integrated servo feedback from a Heidenhain encoder allows the drive controller to supervise speed and position, so the motor can be incorporated into closed-loop motion systems used in industrial automation.

Standard bearings support the rotor during continuous operation. Cooling air is supplied by an external blower energized at 230 V, which helps avoid thermal derating during long duty cycles. The housing supports flange or foot mounting, allowing installation on a base plate or directly on a gearbox face. Heidenhain servo feedback sends high-resolution position data to the inverter, and the active stack matches motor size 164 for increased continuous torque density. The motor ships without an internal brake, so holding torque must come from the drive or a mechanical locking device. Power enters through a top connector oriented in direction B, which helps keep cables clear of adjacent components.

Compact axial dimensions are achieved with motor length C, which helps the motor fit into shallow installation spaces while retaining the output associated with the larger diameter. A smooth shaft supports coupling to hubs, shrink disks, or friction clutches where low backlash is preferred. Because there is no shaft seal, the motor should be installed where exposure to coolant or dust is limited, or an external sealing element should be added. The specified vibration severity level S indicates low residual imbalance, so the assembly can run at rated speed without exceeding allowable frame acceleration.